Arcam FMJ AV 888 og P 777

Arcam kombinasjon FMJ AV 888 Pre-amp/processor og P 777 effekrforsterker, selges samlet.

Med siste oppdatering på programvare og HDMI 1.4, 3D passthrough kort.

Inklusive balanserte kabler mellom processor og effektforsterker. Selges med original fjernkontroll og målemikrofon.

Kan være behjelpelig med oppsett og transport, i rimelig avstand fra Oslo. Jeg har ytstyr for å måle opp anleget så at det blir en perfekt match mellom anlegget, høytalerne og rommet.

AV 888

https://www.studio-22.com/arcam/folletos/FMJ%20AV888.pdf

Manual AV 888

https://www.studio-22.com/arcam/manuales/avr600av888e_man3.pdf

P777 er et riktig kraftverk som driver de fleste høyttalere. Den er oppgitt til 7 x 150W 20Hz to 20Khz i 8 ohms (alle kanalene drevet samtidig), og 7 x 230W i 4 ohms (alle kanalene drevet samtidig).

Når den slås på så er det en microprocessor som slår på effektforsterkerne en etter en så ikke sikringen skal ryke. Men det anbefales å koble den til en 16 A sikring.

Link til anmeldelser: https://www.techradar.com/reviews/audio-visual/hi-fi-and-audio/receivers/arcam-fmj-av888-and-p777-655317/review

og

https://www.whathifi.com/arcam/av888/review

Det de skriver om bugs i programvaren er fikset i senere oppdateringer, og mitt eksemplar er også oppgradert med siste HDMI kort med 3D passthrough.

fmj AV888:

Analogue Audio

• Audiophile quality components for best sound quality

• Multi-channel 7.1 analogue input for DVD-A or SACD sources

• Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources

• 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)

• Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)

• Zone 3 stereo audio, from analogue inputs, linked to Zone 2, volume control independent

• Support for iPod via Arcam rLead / rDock (independent of RS232 connection)

Digital Audio

• State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding

• Wolfson 8471 high end 24bit 192kHz audio DACs

• Crystal Semiconductor stereo ADC and precision electronic volume controls

• Burr Brown DRV134 Balanced line drivers

• Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*

• DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**

• Dolby Volume gain management and Tonal correction processing*

• Dolby Volume processing for balancing of program material gain and tonal balance

• Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz

• 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input

• Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in

digital displays and sources with auto lip-sync for compatible displays

Video

• 5 HDMI inputs (up to 1080p, Deep Colour)

• 2 HDMI outputs (up to 1080p, Deep Colour)

• 5 Component inputs, one monitor output (up to 1080i)

• 5 S-video inputs, one monitor output, 2 tape outputs

• 5 Composite video inputs, one monitor output, 2 tape outputs

• Full video up/down conversion & frame rate conversion of all inputs where technically allowed

• Video enhancements (per input): Edge enhancement, Mosquito noise reduction, Random noise

reduction, Block noise reduction

Custom Install Features

• Independent Zone 2 (audio & video), with fixed/variable volume

• Zone 3 audio with fixed/variable volume (follows Zone 2)

• Balanced audio outputs (XLR) for long cables or active speakers

• RC-5 remote input jacks for all three zones

• IP control over Ethernet

• IR pass through for source components

• Full suite of discrete IR RC-5 codes, including separate on / off etc

• 12Volt triggers, on / off for zones 1, 2 and 3

• Full duplex RS232 control input for more complex control systems

• Optional network card

General

• Supplied with back-lit CR102 learning remote

• control with support for up to 7 other components and a huge on-board code library

• Large, high contrast dimmable VFD front panel display

• User switchable between 120 & 230 volt

• mains supplies

• Size – 435mm (17.1in) wide, 415mm (16.3in)

• deep, 185mm (7.3in) high

• Weight 12kg (26.5lbs) nett, 17kg (37.5lbs) packed

fmj P777:

Audio

• 7 x 150 watts per channel (8 ohms, 20Hz-20kHz, all channels driven)

• 7 x 230 watts per channel (4 ohms, 20Hz-20kHz, all channels driven)

• Peak output current +/- 30amps per channel

• Modular construction with seven independent and fully isolated channels

• Four Sanken heavy duty bi-polar output transistors per channel

• Advanced current feedback design with high slew rate and very low distortion at

all audio frequencies

• All-aluminium chassis and casework for best sound quality

• Comprehensive protection circuitry

- DC offset protection

- VI limiting on each output stage

- Software controlled thermostatic fan

- Over temperature protection

Inputs and Outputs

• Balanced (XLR) input connections

• Unbalanced (RCA) inputs with “loop through” output

• 12v Trigger (3.5mm mono jack) input for standby control

Power Supply Features

• Balanced (XLR) input connections

• Twin 1500 VA toroidal power transformers with separate secondary’s for each

power amplifier

• Separate low noise toroid transformer for standby operation

• 140,000 micro-farads total reservoir capacitance

• “Soft Start” turn on system to prevent large inrush currents

Custom Install Features

• 12v trigger input (3.5mm)

• Heavy duty IEC power inlet

• Middle Atlantic rack shelf available

• Balanced and unbalanced inputs

• Unbalanced input “loop though” connection

• Twin large and quiet temperature controlled fans

General

• Available in black or silver finish

• Size – 435mm (17.1in) wide, 460mm (18.1in)

• deep, 185mm (7.3in) high

• Weight 31kg (68.3) nett, 35kg (81.6lbs) packed