BANANA PI med Touch Skjerm 7″ mm.

Official 7″ inch 800*480 LCD Display Touch Screen for Banana Pi

Selges kr 2490,- for komplett sett med alt inkl., alternativ til raspberry pi ,sending med posten kr 73 ekstra

Kjører Kali Linux.

TFT LCD MODULE:S070WV20-CT16 TP MODULE:FT5306 Size:7.0 inches Resolution:800 (RGB) x 480 Interface:24-bit RGB Connect type:Connector Color Depth:262K Display element:a-si Display Spec. Pixel pitch:0.192 x 0.1805 (mm) Pixel Configuration:R.G.B. Vertical Stripe Display Mode:Normally White Driver IC:HX8254-D, HX8664-B Surface Treatment:HC Viewing Direction:6 O’clock LCM(WxHxD) :164.9 X 100.0 X 5(mm) Active Area(mm):154.08 X 85.92 With CTP LED Numbers:27 LEDS

wiki.52pi.com/index.php/Banana_Pi_official_7-Inch-Capacitance-Screen_SKU:Z-0088 CN2: LCD connector CN5: TP connector CN1: Bpi connector

BPI-M3 Banana Pi M3 A83T Octa-Core (8-core) 2GB RAM with WiFi & Bluetooth4.0

BPI-M3 Banana Pi M3 A83T Octa-Core (8-core) 2GB RAM with WiFi & Bluetooth4.0 with Case, WiFi antenna, adhesive heating processor, 5v power adapter + micro SD Class 10 ready with kali linux installed 8GB INCL. ORIGINAL 7″ Bpi Touch Screen.

What’s the BPi-M3? Banana PI BPI-M3 is the open source hardware platform, Banana PI BPI-M3 is an octa-core version of Banana Pi, it support WIFI+BT on board. Banana Pi BPI-M3 series run Android, Ubuntu linux, Raspberry Pi image and others OS.and eMMC flash onboard. Banana PI PBI-M3 hardware: 1.8GHz ARM Cortex-A7 octa-core processor, 2GB LPDDR3 SDRAM, Banana PI BPI-M3with Gigabit Ethernet port, It can run with Android 5.1.1 smoothly. The size of Banana PI BPI-M3 same as banana pi M1+, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image.

Hardware Specification: SOC Allwinner A83T ARM Cortex-A7 CPU A83T ARM Cortex-A7 octa-core,512 KB L1 cache 1 MB L2 cache GPU PowerVR SGX544MP1Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3 SDRAM 2GB LPDDR3 (shared with GPU) Power 5V 2A via DC power port and/or MicroUSB (OTG)

Features: Low-level peripherals 40 Pins Header, 28xGPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. On board Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D) Wifi Module WiFi 802.11 b/g/n (AP 6212 module on board) Bluetooth BT4.0 On board Storage MicroSD (TF) card,SATA2.0 ,eMMC8G Display — Supports multi-channel HD display: — HDMI 1.4 (Type A – full) — MIPI Display Serial Interface (DSI) for raw LCD panels — 11 HDMI resolutions from 640×480 to 1920×1200 Video Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p60fps or 720p120fps encoding HEVC/H.265 decoder 1080P30fps with software Audio outputs HDMI,analog audio (via 3.5 mm TRRS jack), I2S audio (also potentially for audio input) Camera Parallel 8-bit camera interface MIPI Camera serial Interface(CSI) Audio input On board micphone USB 2 USB 2.0 host, 1 USB 2.0 OTG Buttons Reset button, Power button, U-boot button LEDs Power status Led and RJ45 Led Other IR reciever

Specs CPUA83T ARM Cortex-A7 octa-core,512 KB L1 cache 1 MB L2 cache GPUPowerVR SGX544MP1· Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3 Memory2GB LPDDR3 (shared with GPU) Storage SupportMicroSD Card(up to 64GB)/SATA(up to 2TB USB-to-SATA; GL830)/eMMC(8GB onboard) Onboard Network10/100/1000Mbps ethernet (Realtek RTL8211E/D) WiFi802.11 b/g/n (AP6212) BluetoothBT4.0 (AP6212) Video InParallel 8-bit camera interface MIPI Camera serial Interface(CSI) Video OutHDMI 1.4 DHCP 1.2 with resolutions from(640×640 to 1920×1080) MIPI DSI for RAW LCD panels Audio Out3.5 mm Jack and HDMI Audio InOn board microphone Power SourceMicro USB, optional 5V DC port (center positive 1,6 x 4,4mm) USB Ports2x USB 2.0, USB OTG(Micro USB) ButtonsReset button, Power button, U-boot button GPIO40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground LEDPower LED(red), RJ45 LED(blue), user define LED(green) OSAndroid and Linux etc.OS Dimensions92mm x 60mm Weight45g