Terasic DE10-PRO Intel Stratix 10 FPGA Development kit.

Nypris 10.800 US$ + frakt og MVA. Kun testet og brukt 2-3 ganger som nytt i originalesker

Har 3 stk til salgs 2 stk SX versjon og 1 Stk GX versjon. alle med 32 GB ram.

Pris er pr stk. Ved kjøp av alle 3 kort kun 150.000,- inkl. mva.

Inspired by the demands of AI, Data Center, and High Performance Computing, Terasic’s DE10-PRO is purpose-built for acceleration and high-speed connectivity applications to address the demands of the next-generation high-performance systems.

The board itself takes advantage of the latest Intel® Stratix® 10 to obtain speed and power breakthrough (with up to 70% lower power). Also, armed with 32GB DDR4 memory module running at over 150 Gbps, up to 15.754 GB/s data transfer via PCIe Gen 3 x16 edge between FPGA and host PC, and 4 on-board QSFP28 (100GbE) connectors, the board delivers more than 2X the performance of previous generation acceleration cards.

The DE10-PRO fully supports Intel Open VINO™ toolkit to provide optimal Computer Vision and Deep Learning solutions. Our clients' systems can achieve highest computing performance and lowest cost for their AI applications by leveraging the Stratix® 10 FPGA on DE10-PRO.

Inneholder:

DE10-Pro Development Board

DDR4 ECC SO-DIMM Module x4 (Installed) Totalt 32 GB RAM

PCIe Bracket (Installed)

Air Cooler (Installed)

Power Supply & Power Cable

AC Power Cord

USB to Micro USB Cable

Screw & Copper Pillar Package

DE10-Pro Quick Start Guide

DE10-Pro

FPGA

Intel Stratix 10 GX/SX FPGA

FPGA Configuration

On-Board USB Blaster II or JTAG header for FPGA programming

Avalon-ST (AVST x8) configuration via MAX V CPLD and CFI flash memory

Memory

128MB FLASH

Up to 8 GB DDR4 2666/2400(FPGA Core Speed 1/2 FPGA) for each socket

Communication and Expansion

Four QSFP28 connectors for 100/40/25/10 GbE network interface

PCI Express Gen3 x16 edge connector (includes PCIe drivers)

2x5 Timing expansion header

Others

General user input / output:

4 LEDs

2 push-buttons

2 slide switches

U.FL clock input / output

On-Board Clock

50MHz Oscillator

Programmable Clock Generator

System Monitor and Control

Temperature sensor

Power Monitor

Fan control

Power

PCI Express 2x4 power connector for 12V DC Input

PCI Express edge connector power

Mechanical Specification

PCI Express standard height and 3/4-length

Supported Memory Modules for Sockets

DDR4-2666/2400 for FPGA Core Speed 1/2 FPGA

QDRII+ 550MHz 144MBits

QDRIV 1066MHz 144MBits

Block Diagram

Note, DDR4A is shared with FPGA and HPS.

Memory Sockets

The four DDR4 SODIMM sockets are divided into two groups.

For better user flexibility, two different memory modules can be inserted separately in right & left groups. For example, users can insert two DDR4 modules on the right side and two QDRII+ SRAM modules on the left side.

Limitation: The two SODIMM sockets must be inserted with the same memory to prevent dysfunction on memory module that requires higher voltage.