Audimaxim RAP-1

Fantastisk akustikk prosessoer, strøken DEMO utgave i sølv finish med original emballasje. Kan sendes.


Available for Export: Item Price Suitable for Deduction of 25% Norwegian VAT Tax. Worldwide Express Shipping Available. Inquiries at: jc@malaaudio.no


The world's first non DSP architecture room acoustic processor

RAP-1 is the first room acoustic phase correction system with FIR filter instead of DSP architecture in the
world.

After sampling the acoustic measurement of a single point or multiple points through the measuring microphone, the data analysis is carried out for the various phase superposition or cancellation caused by
the sound wave reflection played by the speaker in the room, and the unique FIR filter coefficient is generated, and then the sound phase is corrected as a whole.
The biggest characteristic of RAP-1 is that it abandons the DSP architecture based on serial computing
and adopts the high-speed FPGA processing platform with parallel algorithm. Our FIR filter processes
each frequency and phase more than 8192 Tap, and the time spent is only 1% of that of DSP architecture, which ensures that there will be no new phase distortion in the digital processing.
RAP-1 Room acoustic processor

ACCURATE
High precision full FIR phase correction.
The sound that people hear in the listening area is the collection of "direct sound" and "reflection sound".
However, because the reflected sound and direct sound always arrive at the listener's ear at different
times, the direct sound and various reflected sound will interfere with each other due to the time difference, and the in-phase sound will be superimposed, The opposite phase of the sound will produce
cancellation, and the superposition and cancellation will distort the original flat frequency response characteristics.
RAP-1 uses a special acoustic algorithm to calculate and analyze the acoustic phase data sampled from
the microphone, and uses the minimum phase FIR filters (minmum phase FLR filters) at 4096 TAP per
channel to accurately correct the phase and frequency characteristics in the 20-20KHz frequency band,
so as to ensure that the correct and straight frequency response and phase characteristics can be obtained in the listening area, Improve the definition of direct sound, reduce the interference of space reflected sound to the minimum, get rid of the uncontrollable room acoustic defect interference, and return
you an accurate, real, clear and powerful low frequency. After processing, the stereo sound field positioning is more accurate, and the stage space feeling is more broad and profound.
Fréquence and phase before After
Direct sound energy distribution before After

REAL TIME
Processing delay as low as 0.25 ms
Due to the huge delay of traditional DSP serial
algorithm architecture for high-order fir phase
correction processing, most audio processors
based on DSP architecture still adopt the
processing mode of IIR + low-order filter, especially for the low-frequency band below
100Hz, the phase distortion is still very large.
RAP-1 abandons DSP architecture and
adopts high-speed FPGA platform based on
parallel algorithm. 8096 tap logic gate performs FIR coefficient processing at the same
time, which is equivalent to 512 DSP chips
working at the same time. The processing
speed is only 1% of that of traditional DSP
audio processor, which avoids the new clock
distortion and phase distortion caused by
high latency in the processing process.

EASY
Easy to use operation interface
After RAP-1 is connected to the router through the network cable, the notebook computer can control it
wirelessly through the WLAN. The software does not need complicated installation procedures, and it can
be opened directly by clicking.
Simple single page operation interface, users only need to place the measurement microphone, click on
a few simple steps on the software interface to complete the measurement operation and optimization
processing. There is no complex setting process, no need for additional professional measurement
equipment to assist and receive professional knowledge training. Ordinary users can master it skillfully,
making professional acoustic calibration more simple and intelligent.
Advanced electronic X-cover function.
It can be used for two-way or three-way electronic frequency x-cover.
RAP-1 is a 6-channel stereo output design, which can be set as stereo, stereo + subwoofer, and
stereo 2-way, stereo 3-way system.
Without complicated setting adjustment, you only need to specify the frequency division point and adjust the appropriate output level according to the sensitivity of each loudspeaker. RAP-1 will automatically optimize the frequency division characteristics for the most accurate.
Because it is based on the feedback of the measured microphone, and through the advanced
acoustic algorithm and high-order FIR filter to optimize the speaker system, it can get the best connection between the speakers of the multi-channel speaker system, so it has a sound incomparable to the
traditional analog or ordinary DSP digital frequency divider.
Adjust to your favorite sound
The frequency response curve can be adjusted freely according to personal preference.
After RAP-1 optimization, it will provide you with a flat frequency response curve. On this basis, you
can adjust your favorite timbre characteristics according to your own preferences by setting the fir EQ
curve.
Compared with the traditional IIR parameter EQ, fir EQ has no phase distortion and will not bring new
phase distortion due to over adjustment, so as to bring you a balanced adjustment without distortion
and timbre pollution. You can adjust according to your own preference as you like without worrying
about damaging the corrected phase characteristics