![USB Swtich](https://images.finncdn.no/dynamic/480x480c//2023/5/vertical-0/23/8/304/392/708_1186317648.jpg)
Bildegalleri
HP Procurve Switch 408
Beskrivelse av varen
Type: Annet
The HP ProCurve Switch 408 is a multiport switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking. With this switch you can build a switched network infrastructure by connecting it to hubs, other switches, or routers; or you can connect directly to computers, printers and servers to provide dedicated bandwidth to those devices. The features of the Switch 408 include:
8 autosensing 10/100Base-TX RJ-45 ports -- all ports can sense the connection speed, 10 Mbps or 100 Mbps, and automatically operate at that speed
HP Auto-MDIX on all ports (on J4097B) or MDI-X/MDI selection button for one port (on J4097A)
Plug and play networking -- all ports are enabled -- just connect the network cables to active network devices and your switched network is operational
Automatic learning of the hardware addresses in the switch's address forwarding table, with up to 1,000 entries on the J4097B or up to 8,000 entries on the J4097A
Auto-negotiation of half-/full-duplex on all ports (IEEE 802.3u)
Auto-negotiation of flow control for ports operating at full-duplex (IEEE 802.3u)
Back pressure flow control for ports operating at half-duplex
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingAnnonsens metadata
Sist endret: 15.8.2024, 07:08 ・ FINN-kode: 304378694