9 kr
![Fats Domino – 20 Greatest Hits](https://images.finncdn.no/dynamic/480x480c//2023/6/vertical-0/30/1/309/077/311_1411400865.jpg)
Brukt i Saab 9-3 2010 mod 120 hk TDI 1.9
Passer flere flere biler med samme motor GM
CHEVROLET / OPEL / ALFA ROMEO MM
PRORACING CHIP BOX OBD2
ProRacing Chip Box OBD2 It became the bestselling product of ProRacing company and revolutionized the global chip tuning market.
Made in Europe / Poland, 2 year warranty
POWER INCREASE
TO 30%
TORQUE INCREASE
TO 30%
FUEL SAVINGS
TO -15% IN DIESEL ENGINES
Description ProRacing Chip Box OBD2
ProRacing Chip Box OBD2 is an innovative product on the global chip tuning market. Thanks to a modern device we have access to the Engine Control Unit (ECU), and we can safely modify it. This allows for increased power and torque up to 30%.
ProRacing Chip Box OBD2 It became the bestselling product of ProRacing company and revolutionized the global chip tuning market.
Chip Box OBD2 contains Microchip processor with built-in FLASH memory.
In this memory, there is a three-dimensional data table, called the ignition map, which contains information on the boost pressure (in cars with a turbine), fuel injection rate, ignition angle, injection time. Depending on many real-time parameters, such as air temperature, current air density, RPM, throttle position and others, we modify this map and get more power, more torque and lower fuel consumption.
The device is additionally equipped with a RESET button. Pressing the RESET button prepares the device for connection to the ECU. The connection is signalled by LEDs on the device. Pressing the RESET button again clears the memory of the device and allows re-connection to the ECU, i.e. the download of current engine parameters. This is of great importance to the car, as it guarantees us:
optimum map according to the current parameters of the car,
guarantee of safety of the resulting modification.
If we are repairing or replacing parts, oils or travel a considerable distance (about 5000 km) – by pressing the RESET button the device will update the map generated by a new read from all ECU parameters.
This solution stands in strong opposition to traditional remapping - where software changes in the ECU are permanent and relative to the original state of the car.
Due to the inevitable wear and tear of the car's components, such permanent modification (over time) exposes our vehicle to significant overload.
The OBD2 device perfectly solves this problem by providing an optimal mapping based on current vehicle parameters, safe for all vehicle components.
Two main consumer requirements were the basis for the development of the device:
The desire to replace a permanent and expensive remapping with a much cheaper, more effective and safe solution
The need to create an easy-to-use device and mount it with Plug&Play-ready cables.
The versatility of the device:
Safe for cars under warranty – without a risk of losing warranty. After removing the device, the car returns to factory settings and leaves no traces in the ECU of the vehicle,
Dedicated to all vehicles equipped with the diagnostic connector of the second generation "OBD2" - ranging from the oldest models of 1996 to the latest car models,
Designed for installation in diesel, petrol, hybrid, petrol engines powered by LPG,
Created for manual and automatic gearboxes.
Highest quality guarantee
Certificate IPC: 7711 / 21
Certificate IEC: 61340-4-1
Our products meet the highest standards of the international association of manufacturers of IPC electronics industry and Polish and international production standards. IPC certificates are recognized around the world for guaranteeing the quality of our products and services in the electronics industry. The use of PN-IEC standards ensures high production quality and repeatability of the process.
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingSist endret: 7.7.2024, 04:20 ・ FINN-kode: 318245067