Bildegalleri
(1/6)
THÖRESS EHT Integrated
Til salgs110 990 kr
Beskrivelse
Our EHT Integrated Amplifier
offers 2×20 watts of output power into a 6 ohm load
combined with low output resistance (high damping
factor). Such providing excellent drive capability for
loudspeakers with medium to low efficiency or critical
impedance behavior (which may present a challenge for
our all-tube triode amplifiers) while offering an ultimate
sonic presentation without involving exotic and costly
power tubes.
The amplifier is based on a unique minimalist
single-ended zero-feedback vacuum tube MOSFET
hybrid topology which we call EHT Topology
(E/intakt H/ybrid T/riode, single-ended hybrid triode).
The EHT topology allows to fully exploit and mate
the most desirable characteristics of both
vacuum tube and solid state devices
determined by their very nature.
offers 2×20 watts of output power into a 6 ohm load
combined with low output resistance (high damping
factor). Such providing excellent drive capability for
loudspeakers with medium to low efficiency or critical
impedance behavior (which may present a challenge for
our all-tube triode amplifiers) while offering an ultimate
sonic presentation without involving exotic and costly
power tubes.
The amplifier is based on a unique minimalist
single-ended zero-feedback vacuum tube MOSFET
hybrid topology which we call EHT Topology
(E/intakt H/ybrid T/riode, single-ended hybrid triode).
The EHT topology allows to fully exploit and mate
the most desirable characteristics of both
vacuum tube and solid state devices
determined by their very nature.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
•Vacuum Tube MOSFET Hybrid Integrated Amplifier with 20 watts of output power per channel (into a 6 ohm load). •Driving capability for critical loudspeaker loads due to very low output impedance (high damping factor).
•Ultimate sonic excellence on par with no-compromise all-tube single-ended triode amplifiers, yet without involving exotic and costly power tubes.
•Unique minimalist zero-feedback EHT schematic: single-ended triode gain stage (6J5GT tube) driving a unity-gain MOSFET output buffer operated in single-ended (class-A) mode with high idle current.
•Total avoidance of protection circuitry.
•4 line level inputs (2×4 RCA jacks) with equal gain manually selectable via rotary dial.
•Remote volume control via high-grade motor driven dual potentiometer with excellent channel balance and low angle sensitivity (for conveniently fine volume adjustment).
•High grade electrolytic capacitors made in Germany in the power supply.
• Low noise low leakage dual-coil C-Core mains transformer made in-house for 230Vac (115Vac via jumper setting), 100Vac (Japan), 220Vac (South-Korea, China,Thailand, Indonesia) or 245Vac (Australia).
•Full hand construction, point-to-point wiring throughout.
•Non-magnetic aluminum casework, anodized printing on front and rear panel, powder-coated lids.
•Dimensions 434x450x184 mm, 184=20 (feet)+134+30 (tubes over case), 450=434+16 (speaker binding posts).
•Dimensions of the shipping crate: 650 x 650 x 350 mm, weight 18Kg.
•Ultimate sonic excellence on par with no-compromise all-tube single-ended triode amplifiers, yet without involving exotic and costly power tubes.
•Unique minimalist zero-feedback EHT schematic: single-ended triode gain stage (6J5GT tube) driving a unity-gain MOSFET output buffer operated in single-ended (class-A) mode with high idle current.
•Total avoidance of protection circuitry.
•4 line level inputs (2×4 RCA jacks) with equal gain manually selectable via rotary dial.
•Remote volume control via high-grade motor driven dual potentiometer with excellent channel balance and low angle sensitivity (for conveniently fine volume adjustment).
•High grade electrolytic capacitors made in Germany in the power supply.
• Low noise low leakage dual-coil C-Core mains transformer made in-house for 230Vac (115Vac via jumper setting), 100Vac (Japan), 220Vac (South-Korea, China,Thailand, Indonesia) or 245Vac (Australia).
•Full hand construction, point-to-point wiring throughout.
•Non-magnetic aluminum casework, anodized printing on front and rear panel, powder-coated lids.
•Dimensions 434x450x184 mm, 184=20 (feet)+134+30 (tubes over case), 450=434+16 (speaker binding posts).
•Dimensions of the shipping crate: 650 x 650 x 350 mm, weight 18Kg.
Beliggenhet
Endpoint Audio
| FINN-kode | 323942827 |
|---|---|
| Sist endret | 13.10.2023 kl. 18:13 |
