CAN-EGT temp sensor til Innovate med flere, INNOVATE, LINK ECU-Porsche bmw

Vært montert på min Porsche 964 med Link ECU.

Følger med sensorer til 6 plugger samt 1 topp sensor

Bare EGT sentralen koster ca 4000 i utlandet

Sensorene koster ca 500.- pr stk i utlandet

Les mere her.

https://www.ampefi.com/product/can-egt-8-channel-thermocouple-interface/https://thesensorconnection.com

The CANEGT 8 Channel Thermocouple Interface allows you to monitor up to 8 K-type thermocouples AND up to 8 Innovate wideband devices over an Innovate Log Chain, and can transmit the data to a MegaSquirt-II, MegaSquirt-III, MicroSquirt, MSPNP, or MS3Pro over the CAN bus, so you don’t use up any analog inputs for these. It can also transmit its data to a laptop directly over USB, or send a 0-5 volt signal based on the thermocouple inputs to work with external gauges.

‘Multi-channel EGT systems add another dimension. “Generally speaking, one looks for consistency between cylinders, because any noticeable variation means that the cylinder that is out of step with the rest has some sort of problem like a flow blockage, an inner chamber variation, or a cam lobe shift that is causing the odd EGT,” Eyres explains. “On an EFI engine, a simple fuel rate change to the ‘out of step’ cylinder will aid in detecting the cause of the variation by either confirming or rejecting fuel (and air) flow variation as the cause.” Read more on the history & benefits of measuring EGT’s on Innovate Motorsports’ Tech Blog.

CANEGT 8 Channel Thermocouple Interface Features:

8 inputs for K-type thermocouples

Cold junction compensation

0-1250 ºC input range

Measures both exhaust gas and cylinder head temperature

8 analog 0-5 volt outputs

CANbus connection for connecting to MegaSquirt

RS232 connection that conects to an Innovate LogChain – currently supports up to 8 Innovate wideband O2 sensors

USB port for laptop connection

Multiple CAN-EGT units can be daisy chained together

CLICK the Documentation & Downloads Tabs above for CANEGT support documentation, configuration & firmware files.

Mounting dimensions are approximately 1.5″ tall, 3.5″ long (including terminal blocks), 4″ wide.

The CANEGT interface will work with DIYAutoTune’s Black Stinger or Red Avenger EGT probes, or other K type thermocouples.

Serial connection uses the older, barrel-style Innovate plug. Connecting to the LC-2 line requires a 2.5 mm to Molex patch cable.