Bildegalleri
Sherman Sveiseapparat DIGITIG 200 DC Multipro
Beskrivelse av varen
Tilstand: Ny
SHERMAN INVERTER SVEISEMASKIN - DIGITIG 200DC MULTIPRO
| Merke: SHERMAN | Sveismetoder: TIG DC, MMA | Strømforsyning: 230V | Sveise strøm: 200A | Effektivitet: 60% |
STANDARDUTSTYR
Sherman sveiseapparat DIGITIG 200 DC Multipro
Sveisebrenner T-26 / 4m
Elektrodekabel
Massekabel
Brukermanual
Garantikort
SHERMAN DIGITIG 200 DC MULTIPRO
DIGITIG 200DC MULTIPRO enheten brukes til å sveise:
Manuell likestrøm av konstruksjonsstål: med belagte elektroder (MMA-metode) og kvalitetsstål og ikke-jernholdige metaller
Ikke-forbruksbar elektrode i en inaktiv gassbeskyttelse (TIG-metode).
Ved utformingen og konstruksjonen av enheten ble de nyeste prestasjonene innen PWM (pulsbreddemodulasjon) og IGBT-moduler (bipolare transistorer med isolert port) brukt, takket være hvilken sveiseren er preget av små dimensjoner og lav vekt.
Under MMA-sveising er ARC FORCE-funksjonen tilgjengelig. Under TIG-sveising er det mulig å justere oppstigningen og nedstigningen av strømmen, gass forstrømning og etterstrømning, og pulsfrekvensen. Enheten har en minnefunksjon for 10 sett med parameterinnstillinger for TIG HF- og MMA-metodene.
Den brukes mye både i produksjon og servicearbeid. Enheten er preget av utmerkede sveiseegenskaper, anbefales spesielt for hjemme- og profesjonelle brukere.
TEKNISKE PARAMETRE
Tilførselsspenning [V]: AC 230 50Hz
Sveismetoder: TIG HF, TIG LIFT, MMA
Produksjonsteknologi: IGBT
Sveise strøm [A]: MMA: 180, TIG: 200
Pliktssyklus [%]: 60
Spenning i tilstanden uten belastning. [V]: 67
Maks. strømforbruk [A]: MMA: 26.6, TIG: 19.6
Maks. strømforbruk [kVA]: MMA: 5.7, TIG: 4.1
Sveise strøm kontroll: Jevn
Gass forstrømning [s]: 0.1-15
Gass etterstrømning [s]: 0-15
Helning av strøm [s]: 0-15
Strøm senking [s]: 0-15
Startstrøm [A]: 5-200
Basisstrøm [A]: 10-90% av sveise strømmen
Kraterstrøm [A]: 5-200
Pulsfrekvens [Hz]: 0.5-999
Pulsvarighet [%]: 10-90
ARC FORCE [A]: 0-10
Vekt [kg]: 7.5
Dimensjoner (L x B x H) [mm]: 395 x 160 x 310
IGBT TEKNOLOGI
Grunnlaget for konstruksjonen av energiomformersystemet til sveiseapparatet er elektroniske systemer laget i IGBT-teknologi, som muliggjør drift i frekvensområdet over 200 kHz.
SIKKERHETSNIVÅ
IP definerer graden av hvilken enheten er motstandsdyktig mot faste og vannkontaminanter som kommer inn i enheten. IP23 betyr at enheten er egnet for innendørs bruk
lukket og ikke egnet for bruk i regn.
ARBEIDSSYKLUS
Pliktssyklusen er basert på en 10-minutters periode. 60% pliktssyklus betyr at etter 6 minutters drift kreves en 4-minutters pause. Pliktssyklus på 100% betyr at enheten kan arbeide kontinuerlig uten avbrudd.
MMA
En metode med belagte elektroder som består av en metallkjerne dekket med en slire. Sveiseren mater elektroden mens den smelter til arbeidsstykket for å holde buen av konstant lengde.
HF - BERØRINGSFRI BUEANTENNELSE
Enhete er utstyrt med en ionisator som gjør det mulig med berøringsfri antennelse av buen.
2T / 4T DRIFTSMODUS
2T - Trykk på knappen i håndtaket på håndtaket slår på ionisatoren og tenner buen. Sveising utføres med knappen trykket.
4T - Trykk på knappen i håndtaket på håndtaket slår på ionisatoren og antennelsen av buen, deretter slipper knappen og starter sveising med sluppet knapp. Trykk på knappen igjen vil stoppe sveising
STARTSTRØM
Strømmen som vises i kretsen etter at knappen i håndtaket på håndtaket er trykket inn. Jo høyere startstrøm, jo lettere er det å slå buen. Imidlertid, når du sveiser tynne plater, kan for høy startstrøm føre til utbrenning.
NEDTID
Tid for nedgang av sveise strømmen fra den innstilte verdien til null eller verdien av kraterstrømmen.
OPPGANGSTID
Tid der sveise strømmen stiger fra startstrømmen til den innstilte sveise strøm verdien.
TIG PULS
Funksjonen påvirker sveises form og buefokus. Pulssveising lar deg også redusere mengden varme som tilføres materialet og brukes når du sveiser tynne materialer.
ENKEL Å BRUKE, KLAR KONTROLLPANEL:
Det brukervennlige kontrollpanelet muliggjør nøyaktig og jevn justering av parametere. Det digitale displayet viser faktisk strøm under sveising.
GASS FORSTRØMNINGSTID
Tiden fra knappen i hå
ndtaket på håndtaket er trykket inn til buen er tent. Vanligvis bør den være lenger enn 0,5 s for å levere beskyttelsesgassen til utløpet av brennerens munnstykke. for å dekke startpunktet for sveising og wolframelektroden.
GASS FLOW-TID
Tiden fra slukking av buen til stenging av gassventilen. for å beskytte den stivnende sveisebadet mot luft og for å avkjøle wolframelektroden. For kort post-flow tid kan føre til oksidasjon av sveisen.
KRATERSTRØM
Strøm brukt i noen sveise moduser når buen ikke slukkes umiddelbart etter at sveise strømmen er redusert. Det lar deg fylle krateret og slutten av sveisen.
PULSBREDDE
Varigheten av pulsen lar deg justere penetreringsdybden. Økning av bredden øker penetreringsdybden, reduserer mengden varme som introduseres i materialet, og reduserer risikoen for å brenne gjennom tynnere plater eller mindre komponenter.
Lavere pulsbreddeverdier bør brukes for høyere strømmer. En større pulsbredde bør brukes for små strømmer, for eksempel bør en bredde større enn 50% brukes for strømmer under 100A.
PULSFREKVENS
Frekvensen med hvilken strømpulsverdien endres mellom sveise strømmen og base strømmen. Justeringsområdet er 0,5 - 999Hz, det standard anbefalte innstillingen er 200Hz.
STERK OG ROBUST KONSTRUKSJON
Huset til enheten er laget av lette og holdbare sammensatte materialer, motstandsdyktige mot alle typer mekanisk skade.
KJØLING
Enheten har et viftekjølesystem, som betydelig øker effektiviteten.
BESKYTTELSE MOT OVEROPPHETING
Strømkilden er utstyrt med en termisk automatisk overbelastningsbryter. Når temperaturen på sveiseapparatet er for høy, kobler beskyttelsen fra sveise strømmen, og overopphetingsdioden lyser. Etter at temperaturen har falt, vil bryteren tilbakestille automatisk.
ENKEL TRANSPORT
Små dimensjoner og lett konstruksjon gjør enheten enkel å ta med til hvilken som helst arbeidsplass. Enhetene er utstyrt med et sterkt håndtak som gjør det enkelt å bære.
SHERMAN INVERTER WELDING MACHINE - DIGITIG 200DC MULTIPRO
| Brand: SHERMAN | Welding methods: TIG DC, MMA | Power supply: 230V | Welding current: 200A | Efficiency: 60% |
STANDARD EQUIPMENT
Sherman Welding machine DIGITIG 200 DC Multipro
Welding torch T-26 / 4m
Electrode cable
Mass cable
User manual
Warranty Card
SHERMAN DIGITIG 200 DC MULTIPRO
The DIGITIG 200DC MULTIPRO device is used for welding:
manual direct current of structural steels: with coated electrodes (MMA method) and quality steels and non-ferrous metals
non-consumable electrode in an inert gas shield (TIG method).
In the design and construction of the device, the latest achievements in the field of PWM (pulse width modulation) and IGBT modules (bipolar transistors with an insulated gate) were used, thanks to which the welder is characterized by small dimensions and low weight.
During MMA welding, the ARC FORCE function is available. During TIG welding, it is possible to adjust the upslope and downslope of the current, gas pre-flow and post-flow, and pulse parameters. The device has a memory of 10 sets of parameter settings for the TIG HF and MMA methods.
It is widely used both in production and service works. The device is characterized by excellent welding properties, recommended especially for home and professional users.
TECHNICAL PARAMETERS
Supply voltage [V]: AC 230 50Hz
Welding methods: TIG HF, TIG LIFT, MMA
Manufacturing technology: IGBT
Welding current [A]: MMA: 180, TIG: 200
Duty cycle [%]: 60
Tension in the state without load. [V]: 67
Max. current consumption [A]: MMA: 26.6, TIG: 19.6
Max. power consumption [kVA]: MMA: 5.7, TIG: 4.1
Welding current control: Smooth
Gas pre-flow [s] : 0.1-15
Gas post flow [s]: 0-15
Slope of current [s]: 0-15
Current dropping [s]: 0-15
Initial current [A]: 5-200
Base current [A]: 10-90% of the welding current
Crater current [A]: 5-200
Pulse frequency [Hz]: 0.5-999
Pulse Duration [%]: 10-90
ARC FORCE [A]: 0-10
Weight [kg]: 7.5
Dimensions (L x W x H) [mm]: 395 x 160 x 310
IGBT TECHNOLOGY
The basis for the construction of the electric energy conversion system of the welding machine are electronic systems made in the IGBT technology, enabling operation in the frequency range above 200 kHz.
LEVEL OF SECURITY
The IP defines the degree to which the device is resistant to solid and water contamination entering the device. IP23 means that the device is suitable for indoor use
closed and not suitable for use in the rain.
WORK CYCLE
The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation, a 4-minute break is required. Duty cycle of 100% means that the device can work continuously without interruption.
MMA
A covered electrode method consisting of a metal core covered with a sheath. The welder feeds the electrode as it fuses to the workpiece so as to keep the arc of a constant length.
HF - NON-CONTACT ARC IGNITION
The device is equipped with an ionizer enabling contactless ignition of the arc.
2T / 4T OPERATING MODE
2T - pressing the button in the handle of the handle turns on the ionizer and ignites the arc. Welding is carried out with the button pressed.
4T - pressing the button in the handle of the handle will turn on the ionizer and ignition of the arc, then release the button and start welding with the released button. Pressing the button again will stop welding
INITIAL CURRENT
The current that appears in the circuit after pressing the button in the handle of the handle. The higher the starting current, the easier it is to strike the arc. However, when welding thin sheets, too high a starting current can lead to burnout.
DOWNTIME
Time for the downslope of the welding current from the set value to zero or the value of the crater current.
RISE TIME
Time in which the welding current rises from the starting current to the set welding current value.
TIG PULSE
The function affects the weld shape and arc focus. Pulse welding also allows you to reduce the amount of heat supplied to the material and is used when welding thin materials.
EASY TO USE, CLEAR CONTROL PANEL:
The easy-to-use control panel enables precise and smooth adjustment of parameters. The digital display shows the actual current during welding.
GAS PRE-FLOW TIME
The time from pressing the button in the handle of the handle to the moment the arc is struck. Typically it should be longer than 0.5 s to deliver the shielding gas to the exit of the torch nozzle. to cover the starting point of welding and the tungsten electrode.
GAS FLOW TIME
The time from the extinction of the arc to the closing of the gas valve. to shield the solidifying weld pool from air and to cool the tungsten electrode. Too short a post-flow time may result in oxidation of the weld.
CRATER CURRENT
Current used in some welding modes when the arc is not quenched immediately after the welding current downslope. It allows you to fill the crater and the end of the weld.
PULSE WIDTH
Duration of the pulse allows you to adjust the depth of penetration. Increasing the width increases the penetration depth, reducing the amount of heat introduced into the material, reducing the risk of burning through thinner sheets or smaller components.
Lower pulse width values should be used for higher currents. A larger pulse width should be used for small currents, for example a width greater than 50% should be used for currents below 100A.
PULSE FREQUENCY
The frequency with which the current pulse value changes between the welding current and the base current. The adjustment range is 0.5 - 999Hz, the standard recommended setting is 200Hz.
STRONG AND ROBUST CONSTRUCTION
The housing of the device is made of light and durable composites, resistant to all kinds of mechanical damage.
COOLING
The device has a fan cooling system, which significantly increases its efficiency.
PROTECTION AGAINST OVERHEATING
The power source is equipped with a thermal automatic overload switch. When the temperature of the welding machine is too high, the protection disconnects the welding current and the overheating diode lights up. After the temperature has dropped, the switch will reset automatically.
EASY TRANSPORT
Small dimensions and light structure make the device easy to take to any workplace. The devices are equipped with a strong handle that makes it easy to carry.
Bedrift uten avtale
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingAnnonsens metadata
Sist endret: 20.4.2024, 12:03 ・ FINN-kode: 340634418