Eterna KonTiki Pro Diver 1000m

Må legge denne ut igjen da kjøper på Chrono24 nektet å hente den ut når han fant ut at han måtte betale toll. Denne ser du ikke ofte, minimalt med bruksmerker, kun to små striper i glass ved kl.15, kun synlig fra visse vinkler. Brukt i rotasjon med andre klokker. leveres komplett i original eske og medfølgende papirer. Denne ligger til godt over 60000kr på Chrono 24. Den er veldig behagelig på armen og tiltrekker seg mye oppmerksomhet.

Tar naturligvis mot seriøse bud.

The watch:

The concept of the Eterna KonTiki Diver 1000M was first shown at Baselworld 2005 and the first models of the watch could be purchased at the end of 2007.

This KonTiki is truly unusual, as the titanium case sits in a steel bridge construction and can / must be unlocked and flipped open via two pushers to set the time and / or the dive ring. When the case is closed, the crown at 12 o'clock and the diver's bezel, which can be adjusted in both directions, are automatically secured against unintentional pulling or adjustment.

Besides the case design, there are other special features, such as the non-screwed crown and the inner diver's ring, which is operated via the outer bezel. Eterna had previously had (rather mixed) experiences with the "inner-outer rotating ring" with the limited edition Kontiki Sports. The butterfly clasp is also intricately designed and includes a diver's extension that can be folded out without opening the actual clasp, extending the strap by wetsuit-suitable three inches.

So much innovation came at a price, however; the KonTiki Diver 1000M cost 6,800.00 euros, on par with a Rolex Sea-Dweller, which then made selling the watch much more difficult. In 2010, Eterna's partner at the time, Porsche Design, followed suit with the P'6780 and also launched a watch in this design. However, the Porsche was simpler in design and "only" contained an ETA 2892.

The technical specifications:

Case:

Material: movement container: black PVD coated titanium, satin stainless steel 316L bezel.

Bridge: satin and polished stainless steel 316L

Crystal: cambered sapphire crystal, anti-reflective coating

Caseback: screwed and engraved caseback

Dimensions: Ø 46.00 mm, height: ↕︎ 16.00 mm, length: ↔︎ 52.80 mm

Weight: approx. 210 g

Water resistance: waterproof up to a pressure of 100 bar (1000 m).

Features: internal diver's rotating bezel adjustable in both directions via the external lunette

Dial and hands:

Color: matte black, white hands covered with Swiss Super-LumiNova®, applied logo.

Hour scale: Numerals and indexes overlaid with Swiss Super-LumiNova®, imprinted minute track

Hands: white hands, covered with Swiss Super-LumiNova®.

Movement and functions:

Caliber: ETA automatic caliber 2897, COSC certified, 28,800 A/h (4 Hz), center seconds, 21 jewels, Incabloc shock protection, blued screws, Glucydur balance, Nivarox hairspring, stop-seconds.

Power reserve: approx. 42 hours

Function: hours, minutes, seconds, date and power reserve indicator

Bracelet:

Material: rubber,

Color: black

Clasp: stainless steel double folding clasp, button clasp, separate diver's extension that can be folded out via another button clasp

List price (2007):

6.800,00 Euro