(1/3)

Lader 24V 150A Dc Whisper Power

Trygg handel med Fiks ferdig

Varen blir sendt til deg, og du har 24 timer på deg til å inspisere den før pengene overføres til selger.

Lader. DC PowerCube 24 VDC – 150 A

Har du lithium batterier er dette løsningen du får kort lade tid noe som er svært gunstig mår man kjører generator også😄

Heavy-duty battery charger / power supply model DC PowerCube 24 VDC – 150 A. Designed for more extensive electrical systems with a large battery bank and significant DC consumption. It converts the delivered power (from the grid or generator) to DC for lighting, electronic equipment, pumps and other DC loads.

DC power up to 150 A

AC can be adjusted from 4 A to 16 A

Provides up to 3.5 kW from land power

Up to 4.3 kW from Genverter©

Adjustable Genverter© load (as well as rpm)

12 VDC / 20 A output, three-step for 12 VDC batteries

Standard analogue panel supplied

WhisperConnect CAN-bus connection for central monitoring

Suitable for worldwide use, 90 to 264 VAC, 50/60 Hz (automatically adjusts)

GENERAL SYSTEM SPECIFICATIONS

Nominal battery voltage 24 VDC

Output current 0 - 150 A (short circuit protected)

Output voltage 26.5 / 28.5 VDC

Recommended battery capacity: 300 to 1500 Ah

Charge characteristic 3+ step charge characteristic

Slave charger 12 V - 20 A (3+ step charge characteristic) short circuit protected

INPUT SPECIFICATIONS

Grid input voltage range 90 - 264 VAC (45 - 65 Hz), (3 wire connection)

Grid input current Adjustable, from 2 A to 16 A

PM generator input range 80 - 300 VAC (30 - 500 Hz), (3 wire connection)

PM input current Adjustable, from 2 A to 14.5 A

Power factor (cos phi) > 0.85

Power Factor Correction (PFC) EN 61000-3-2

Temperature compensation -30 mV / °C

TECHNICAL SPECIFICATIONS

Supported battery types Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion

Battery leakage current <5 mA per battery

Charge voltages Bulk, Absorption, Float

Charge voltage AGM / GEL at 25°C 28.80 VDC, 28.50 VDC, 27.20 VDC

Charge voltage Traction at 25°C 29.20 VDC, 28.90 VDC, 26.50 VDC

Charge voltage Open lead acid at 25°C 28.50 VDC, 28.50 VDC, 26.50 VDC

Charge voltage Lithium ION at 25°C 28.80 VDC, 27.20 VDC, 26.50 VDC

Return current from absorption to float 6% of Imax

PowerCube status on/off Digital output (relay, two-way contact)

Failure Digital output (relay, two-way contact)

AC grid disabled Digital input (potential free input, closed is disabled)

PM input disabled Digital input (potential free input, closed is disabled)

Conformity Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1

PROTECTIONS

PM input isolation protection Yes (open collector output 30 VDC, 100 mA)

Over temperature protection Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down)

Overvoltage protection (manual restart needed) 36 VDC + / - 0.5 VDC

Ingress Protection index IP21

MECHANICAL SPECIFICATIONS

Main battery connection 2 x M10 studs

Slave battery connection 1 x M5 stud

Earth grounding lug 1 x M6 stud

AC grid input 3 x M3 screw terminal block

PM grid input 3 x M3 screw terminal block

Remote control panel RJ12