Programmerbar tenningsmodul Suzuki RGV 250 Aprilia RS 250

VCDI-21 fra Zeeltronic, programmerbar tenningsmodul til Suzuki RGV 250 VJ22 og Aprilia RS 250.

Bruksanvisning og koblingsskjema følger med.

NB: For å programmere denne trenger man håndholdt programmerer/tester fra Zeeltronic.

Info fra produsenten:

Technical data:

- minimum revs 200 RPM

- maximum revs 20000 RPM

- minimum supply voltage 8 Volts

- maximum supply voltage 20 Volts

- current draw 25mA

- max. supply voltage for 1 minute 40 Volts

- dimensions (LxWxH) 72x50x27mm

Circuit is protected against reverse supply voltage (wrong connection).

Features:

- two channel isolated input

- 2 custom programmable curves ( TPS33%,TPS66%,TPS100% )

- store and load function for 2 ignition curve sets

- TPS function ( 3D interpolation between programmed curves )

- programmable on/off output for solenoid (RPM and TPS dependent)

- programmable duty cycle (pulsed) output for solenoid (RPM and TPS dependent)

- shift light output

- shift kill

- map switch for changing ignition map while riding

- tachometer output

- easy and fast programming on the field, via handheld programmer

- programming while machine running - you can immediately see effects

- each curve can be set with 4 to 12 rev points

- each curve point can be programmed with 100rpm steps and 0,1deg steps

- three stage rev limit ( retard timing, reduced spark, spark off )

- signal delay compensation

- instant monitoring of rev and angle, via handheld programmer

- fast processing for high accuracy - delays from 1us

- theoretical maximum revs at 20000RPM (tested with pulse generator and oscilloscope)

- timing calculation for every 1RPM change (1000, 1001, 1002, .. .., 9805, 9806, ...)