Ashdown FS-Drive Plus basspedal

Selger pent brukt Ashdown FS-Drive Plus pedal da jeg nedskalerer pedalbrettet mitt, og denne ikke blir særlig brukt. Fet bass drive som kan stilles inn på LF/HF individuelt. Bygd som en tanks!

Selger også unna en del andre pedaler, sjekk de andre annonsene mine.

Litt info:

Capable of taking your bass sound from a slight grunge through to high gain meltdown, the Drive Plus lets you add distortion to the high and low frequency component of your bass signal individually, so you can fuzz the top end and leave the low end cleaner or vice versa. This lets you sculpt unique powerful distorted tones that preserve the core tones you need to fit in the mix. To get the best results we found that different distortion types were needed for the different frequency bands.

The Drive control sets the amount of distortion, Distortion Tone adjusts its character and Distortion Level balances the amount of the effect with the clean bass signal.

Whether you're using an active or passive bass, the Ashdown VU meter in combination with the Input level knob let's you easily find the sweet spot, ensuring you get the best possible tone in and out - whatever instrument you're using.

Ashdown Pedals feature genuine 'true bypass' switching for zero-colouration of your input signal when the pedal isn't in use. The Output level control lets you dial in the perfect balance between the effect and the true bypass level.

Technical Specifications:

HF Drive filter section

Filter frequency 180Hz

Filter roll off 12dB/octave

LF Drive filter section

Filter frequency 600Hz

Filter roll off 12dB/octave

Composite crossover point of the overlapping High and Low pass filters =

250Hz

HF Gain

0 to 60dB

LF Gain

0 to 30dB

Input

Impedance 470k Ohms

Signal level –10dBv to 0dBv

Output

Impedance 10k Ohms

Signal level variable –10dBv to 0dBv

Supply

Internal 9v battery

External supply 9v DC adaptor. Centre pin negative.