Meyersound 700hp Dobbel 18" Aktive Subber

Selger totalt 4 stk. Meyersound 700HP Aktive dobbel 18" subber. Disse sparker noe vanvittig og egner seg spesielt godt til større lokaler og utendørsbruk. Disse går til 28" og reagerer best på trege transienter.

Vi selger disse da de ikke brukes lengre.

SELGES: 25 000,- NOK (Pr. Stk.)

Info fra fabrikanten:

Meyer Sound 700-HP Powered Subwoofer

The Meyer Sound 700-HP ultrahigh-power subwoofer sets a new standard for the power-to-size equation. The 700-HP’s power and bandwidth handle high continuous operating levels and extreme transient information with minimal distortion in its operating frequency range. Meyer Sound’s rigorous design approach has been applied to extract the greatest efficiency from every part of the system, resulting in the 700-HP subwoofer's effortless reproduction of low-frequency transient information. The transducers, amplification and control electronics of the self powered 700-HP are created as a symbiotic system that optimizes performance and maximizes its tremendous power.

Features:

Stackable

Flyable using optional rigging kit

Extremely low distortion for ultimate low-frequency clarity

Very high peak power yields excellent transient reproduction

Transportable in blocks using optional heavy duty caster frame

Exceptionally reliable and durable

Specifications:

ACOUSTICAL

Operating Frequency Range1: 28 Hz – 150 Hz

Free Field Frequency Response2: 30 Hz – 125 Hz ±4 dB

Phase Response: 45 Hz - 145 Hz ±30°

Maximum Peak SPL3: 139 dB

Dynamic Range: >110 dB

COVERAGE

360° (single unit); varies with number of units and configuration

TRANSDUCERS

Low Frequency:

Two 18" cone drivers Nominal impedance: 4 Ω Voice coil size: 4" Power-handling capability: 1200 W (AES)

4

AUDIO INPUT

Type: Differential, electronically balanced

Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection

Connectors: Female XLR input with male XLR loop output or VEAM all-in-one (integrates AC, audio and network)

Input Impedance: 10 kΩ differential between pins 2 and 3

Wiring:

Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies

Pin 2: Signal +

Pin 3: Signal –

Case: Earth ground and chassis

DC Blocking: None on input, DC blocked through signal processing

CMRR: >50 dB, typically 80 dB (50 Hz–500 Hz)

RF Filter:

Common mode: 425 kHz

Differential mode: 142 kHz

TIM Filter: Integral to signal processing (<80 kHz)

Nominal Input Sensitivity: 0 dBV (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music

Input Level: Audio source must be capable of producing a minimum of +20 dBV (10V rms, 14 V pk) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker

AMPLIFIER

Type: Two-channel complementary power MOSFET output stages (class AB/H)

Total Output Power: 2250 W (1125 W/channel)5

THD, IM, TIM: <0.02%

Load Capacity: 4 Ω each channel

Cooling: Forced air cooling, two fans (one ultrahigh-speed reserve fan)

AC POWER

Connectors: 250 V AC NEMA L6-20 (twist lock), IEC 309 male inlet, or VEAM

Automatic Voltage Selection: Automatic, two ranges, each with high-low voltage tap

Safety Agency Rated Operating Range: 95 V AC – 125 V AC, 208 V AC - 235 V AC; 50/60 Hz

Turn‑on and Turn‑off Points: 85 V AC - 134 V AC; 165 V AC - 264 V AC; 50/60 Hz

Current Draw- Idle Current: 0.640 A rms (115 V AC); 0.320 A rms (230 V AC); 0.850 A rms (100 V AC)

Max Long-Term Continuous Current (>10 sec): 8.8 A rms (115 V AC); 4 A rms (230 V AC); 10 A rms (100 V AC)

Burst Current (<1 sec): 19 A rms (115 V AC); 9.5 A rms (230 V AC); 22 A rms (100 V AC)

Ultimate Short-Term Peak Current Draw: 39 A pk (115 V AC); 20 A pk (230 V AC); 45 A pk (100 V AC)

Inrush Current: 7 A pk (115 V AC); 7 A pk (230 V AC); 10 A pk (100 V AC)

RMS NETWORK

Equipped with two‑conductor twisted‑pair network, reporting all operating parameters of amplifiers to system operator’s host computer.

PHYSICAL

Dimensions without Rigging: 45.93" w x 22.50" h x 30.00" d (1167 mm x 572 mm x 762 mm)

Dimensions with Rigging: 50.58" w x 22.50" h x 30.00" d (1285 mm x 572 mm x 762 mm)

Weight: 204 lbs (92.53 kg)

Weight with Rigging: 259 lbs (117.48 kg)

Enclosure: Multi-ply hardwood

Protective Grille: Perforated metal grille lined with acoustical black mesh