Cisco 7010 NEXUS Switch / core switch

Flott Cisco Nexus 7010 med 2 stk Cisco Nexus 7000 Series Supervisor Modules.

2x48 10gbit sfp+ switcher og 2x48 eth 10gbit swticher. L3

Dette er et Monster av en switch som ofte blir brukt i store datacenter / bedrifter.

Må hentes pga vekt ( 300 kg )

1 N7K-F248XP-25E 292 W 450 W Powered-Up

2 N7K-F248XT-25E 303 W 550 W Powered-Up

3 N7K-F248XT-25E 301 W 550 W Powered-Up

4 N7K-F248XP-25E 288 W 450 W Powered-Up

5 N7K-SUP2 97 W 190 W Powered-Up

6 N7K-SUP2 95 W 190 W Powered-Up

Xb1 N7K-C7010-FAB-2 43 W 80 W Powered-Up

Xb2 N7K-C7010-FAB-2 42 W 80 W Powered-Up

Xb3 N7K-C7010-FAB-2 44 W 80 W Powered-Up

Xb4 N7K-C7010-FAB-2 43 W 80 W Powered-Up

Xb5 N7K-C7010-FAB-2 43 W 80 W Powered-Up

fan1 N7K-C7010-FAN-S 198 W 720 W Powered-Up

fan2 N7K-C7010-FAN-S 198 W 720 W Powered-Up

fan3 N7K-C7010-FAN-F 14 W 120 W Powered-Up

fan4 N7K-C7010-FAN-F 14 W 120 W Powered-Up

Cisco Nexus 7000 10-Slot Switch Chassis

● The Cisco Nexus 7000 10-Slot chassis with up to eight I/O module slots supports up to 384 x 1 and 10 Gigabit Ethernet ports, 48 x 40 Gigabit Ethernet ports, and 16 x 100 Gigabit Ethernet ports, meeting the demands of large data center deployments. It has two dedicated supervisor slots to provide full redundancy.

● Front-to-back airflow helps ensure that use of the Cisco Nexus 7000 10-Slot chassis addresses the requirement for hot-aisle and cold-aisle deployments without additional complexity.

● The system uses dual system and fabric fan trays for cooling. Each fan tray is redundant and composed of independent variable-speed fans that automatically adjust to the ambient temperature, helping reduce power consumption in well-managed facilities while helping enable optimum operation of the switch. The system design increases cooling efficiency and provides redundancy capabilities, allowing hot swapping without affecting the system; if either a single fan or a complete fan tray fails, the system continues to operate without a significant degradation in cooling capacity.

● The system supports an optional air filter to help ensure clean air flow through the system. The addition of the air filter satisfies Network Equipment Building Standards (NEBS) requirements.

● I/O modules and supervisor modules are accessible from the front, and fabric modules, power supplies, and fan trays are accessible from the back.

Cisco

L3

Switch

LAB

CCNA

Pga av vekt må denne helst hentes. testet ok