Everspring Z-Wave Motion Sensor

Everspring Z-Wave bevegelse sensor til innendørs og utendørs bruk.

Er lett å inkludere (standard bevegelse sensor) i en Zwave kontroller, f. eks. den jeg selger billig i en annen annonse, den viser seg i bildet helt nede..

Sensoren funker fortsatt bra, men jeg har ikke lenger bruk for den.

Brukermanualen (delvis på bildene) følger med.

her er noe info på engelsk.

Product Description

This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. It needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.

The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.