MFJ-4416B Effektiv batteribooster!

Selger her en kjekk sak for 12 V.

Hvis du er avhengig av høyest mulig spenning ut av ditt 12V dc system trenger du en sånn sak som dette.

Input 9-14V vil gi output 12-14V.

Den er tiltenkt portabel bruk av amatørradio, typisk 100W radioer som trenger mest mulig effekt ut.

Kan helt sikkert brukes i andre oppsett av 12V også, batterisystem, solceller, nødstrøm, nødsamband etc.

Denne ble kjøpt inn til bruk på en Icom IC-7000 som er veldig «kresen» på batterispenningen, og fungerte kjempebra til dette bruket i portabelt oppsett.

Har også testet denne på Kenwood TS-480 og Yaesu FT-857 med god erfaring.

Boosteren er lite og pent brukt, og kommer i original eske med manual.

Kan sendes mot porto og Vipps.

(150,- for forsendelse ).

Eller hentes i Sarpsborg

Legger med info fra en nettside om produktet;

MFJ 4416B Super Battery Boosters keep your transceiver operating at full efficiency and performance by eliminating low or marginal voltages in the mobile environment.

They accomplish this by boosting input voltages as low as 9 V up to the desired 13.8 V at 25 amps peak with a typical efficiency of close to 90 percent. Even at their compact, lightweight 1.3 lbs., they are designed to be rugged, reliable, and easy to use.

The MFJ 4416B super battery boosters include Anderson PowerPole connectors and high-current, 5-way binding posts for both the DC input and regulated output. An internal 30 amp input fuse protects them from excess output current demands. There are also selectable limits on the minimum voltage that can be accepted, protecting you from over-discharging a battery and possibly damaging it. Should regulation be lost, they also include output over-voltage crowbar protection.

An RF sampling port can be connected to your transceiver's transmission line with a UHF-T connector, sold separately. When this feature is enabled, the MFJ-4416 is bypassed unless RF is sensed so no regulator switching-efficiency penalties are incurred during receive mode. An additional efficiency enhancement feature is a user-adjustable output voltage control, which lets you set the output voltage anywhere between 12 and 13.8 V. When setting the output at 12 V, input voltages greater than 12 V will pass through, but the efficiency of the regulator is higher, and lower input voltage means that your transceiver will run cooler. They typically save over 30 watts in heat dissipation during transmit, and even 3-4 watts during receive.

Keep your mobile rig powered the right way with the right voltage. Order MFJ 4416B Super Battery Boosters to keep your DC supply steady!