JBL utehøyttalere + forsterker

Sterke og gode utehøyttalere - kun brukt på 2 event. Noen overfladiske riper på toppen, men ellers som nye.

Selges med forsterker og lydledning (10 meter lange).

Høyttalere:

JBL AWC129 | 12" coax, 90x90 horn, 400W, grå

The AWC129 is comprised of a high-power coaxial 300 mm (12 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered polepiece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies.

Features

Highly weather-resistant IP56 rating

Consistent 90° x 90° broadband pattern control

Components:

• 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil.

• 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.

Extraordinary clarity for speech, with extended frequency response for music.

Advanced high-slope crossover network for constant coverage and smooth, natural midrange.

400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.

High-power passive crossover network.

Overload protection

55 Hz – 20 kHz frequency response.

200 Watt 70V/100V multi-tap (built-in transformer)

direct 8Ω low-impedance.

Forsterker:

Crown XLi2500 | forsterker 2x750W @ 4 ohm | XLR / RCA | speakON / skruklemme

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

Features

Stereo/parallel/bridge-mono mode

User selectable input sensitivity - 0.775V and 1.4V

Efficient forced-air cooling prevents excessive thermal buildup

Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs

Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

Protection against shorts, no-load, on/off thumps and radio-frequency interference