M-audio referanse monitor høyttalere til Musikk / streaming / PC. Aktive

Pen brukte M-Audio referanse monitor høyttalere aktive.

Aktive betyr at de ikke behøver en ekstern forsterker, kun inputkilde.

Følger med en eksterne bluetooth mottaker.

Fin til musikkproduksjon, streaming, podcast eller PC.

Kan hentes/leveres i Strømmen, Lillestrøm, Majourstuen og Ensjø.

Specs:

Type: Two-way desktop reference speaker

Low-Frequency Driver: 4" diameter, polypropylene-coated, magnetically shielded with high-temperature voice coil

High-Frequency Driver: 1" diameter, magnetically shielded silk cone tweeter

Frequency Response: 85 Hz – 20 kHz

Crossover Frequency: 2.7 kHz

RMS SPL: 101.5 dB @ 1 meter

Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)

Input Connectors: Left and right RCA line input, left and right 1/4" TRS input, and 1/8" aux input

Polarity: Positive signal at "+" input produces outward low-frequency cone displacement

Dynamic Power: 20 watts continuous, per channel into 4 Ω

Input Impedance: 10 k Ω unbalanced, 20 k Ω balanced

Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum

Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter

indicator: blue power LED ring around volume knob on front panel

Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via attached 2-conductor line cord

Cabinet: Vinyl-laminated MDF

Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) / 22.2 cm (H) x 15.2 cm (W) x 18.4" (D)

Weight: 14 lbs. / 6.34 kg