KOMPRESSOR PRO 100L 540L/MIN 230V JAGER GERMAN

Description copied from the manufacturer's website:

Made in Poland.

Pro quality. Full service and guarantee.

The company has been on the market for 20 years.

Tank loading time from 0 to 8 bar only 1 min 50 s !!!

Tank loading time from 5 to 8 bar - 30 seconds - 500l/min effective efficiency on quick connectors !!!

Probably the fastest and most powerful 100 in the country.

We do not overstate data and parameters !!!

Please be careful with compressors that have cheated parameters !!!

They cheat on the capacity of the tank is usually 80l and sell it as 100l and the efficiency overstate it by 100 - 200% - it is usually only 200 a couple of liters !!!

Check the test reviews and opinions on Youtube !!!

Don't be fooled !!!

Technical parameters:

Power supply from a socket, single-phase.

Tank – 100 liters

Power supply voltage – 230V / 50 Hz

Maximum tank pressure - 10 BAR

Pump operating pressure - 8 BAR

Engine power - 3 kW – 4 HP

Theoretical capacity – 540 l/min

Effective test capacity from 0 to 8 bar – 380 l/min

Actual test capacity, effective on exhaust on compression - 500 l/min.

Engine speed – 2820 rpm

Pump speed – slow-speed type

Sound pressure level - 82.4 dB (A)

Sound power level - 97 dB (A)

You get:

Compressor

Safety switch

2 quick connectors

Air filters

One pressure gauge showing the pressure.

Drain valve for accumulated water in the tank.

Two direct outlets on the side of the cylinder.

Four very large, comfortable wheels.

Extensive user manual in Eng.

Complete documentation for trouble-free registration with UDT - Office of Technical Inspection.

Maximum High Efficiency. New pumps with reduced internal resistance. And in them new larger crank-piston systems. Everything for even greater efficiency.

Why you shouldn't use pressures above 8 bar in piston compressors.

10 bar / 12.5 bar or more is a DEFECT and problems, not an advantage!!!

Firstly.

The vast majority of paint guns need a maximum working pressure of 1.5 to 3.5 bar. Exceeding this pressure in such a gun can damage it.

Impact wrenches for servicing e.g. passenger cars or BUSes up to 3.5 tons. It has a maximum working pressure!!! 6.3 Bar. Exceeding this pressure in such a wrench can damage it.

The same applies to compressor-powered tools such as:

- grinders

- pneumatic lifters,

and any other pneumatic devices used in workshops. Check the technical data of the device you want to buy for yourself!

In a word, the working pressure is 8 bar. It more than meets the needs of 99% of devices in a company and home workshop.

Secondly.

Air temperature in the cylinder.

Compressing air, for example, to 10 or extremely!!! strongly 12.5 bar, very strongly increases the temperature of the air in the tank. This is a serious defect!

In our compressors, thanks to the use of high-quality materials, the average temperature of the air compressed in the cylinder is on average below 37*C.

If we have such a temperature when compressing air to 8 bar, how much higher is it when we compress the air in the tank to an even higher temperature???

Our research, which we have conducted, shows that:

When compressing air to 12.5 bar. The air temperature, very often, exceeds 80*C!!!

In the warranty records of guns, keys and other devices mentioned above. Most often there is a provision prohibiting the supply of air at a temperature exceeding 60*C

Above this temperature, the devices used are subject to mechanical damage, including seals. Damage caused in this way is not covered by the warranty. Such equipment is only suitable for throwing away.

Thirdly.

At such a high temperature in the tank, the heated air does not have time to cool down and all the water vapor contained in the air goes to the spray gun, wrench or other devices. Destroying them corrosive. In the case of, for example, painting, paint defects appear.

In our tanks, the air at a lower temperature, the difference is almost 100% - dehydrates. In the form of condensate in the tank. Thanks to this, we get incomparably better air for use with tools. Practically devoid of water vapor, water.

Fourthly.

The head of the air pump at a pressure of 12.5 bar is so hot that you can get burned.

The pumps are greatly overheated and have a shorter service life. The oil works at enormous temperatures very quickly losing its properties. The pumps are forced to work at the limit of their strength. Their durability is usually very short.

Therefore, in piston compressors, pressures above 8 bar should not be used.

10 bar, 12.5 bar or more is a disadvantage, not an advantage!!!

Maximum High Power. The latest solutions in the field of energy saving. New energy-saving engines that consume even less electricity. The new 3 kW engine perfectly replaces the old 3 kW units. You no longer have to worry about whether your electrical installation will withstand it.

Maximum Your Safety. Guaranteed by original, branded safety valves..

New electric engine. Class A unit. Over 30% lower energy consumption compared to its predecessor.

Maximum Durability. Even lower RPM! New, low-speed pump with three cylinders in the W configuration. It now needs even lower RPM to continue to provide the highest parameters and the greatest possible durability.

High-quality equipment. Additional ubiquitous radiators perfectly distribute accumulated heat from the most critical elements of the pump and engine.

Additional radiators have pipes and new technology of cast iron pump castings.

The latest thermal and electrical protection of the engine.

New generation, energy-saving engine (Ver. 2.0) with high power and high efficiency - 3 kW. Replaces the old solution. The current, very successful and praised engines from previous models are replaced by a new, energy-saving unit in class A.

You no longer have to wonder if it will blow fuses in your electrical switchboard.

Very low temperature of the discharge air to the cylinder.

New tanks and new anti-corrosion protection inside the tank.

The latest generation of environmentally friendly paints.

You certainly get the best solutions in the latest version.

The technical data of our compressors have real, certified and measured operating parameters.

A compressor for professional and home use.

Each purchased compressor has complete documentation, required by law.

When buying a compressor, a compressor offered by STOKEXPRES, you can be sure that you are investing in your own safety and that of your employees.

Compressors offered by STOKEXPRES undergo additional hydrodynamic, strength, tightness and organoleptic tests several times a year. The tests take place in our country - Poland. They are performed by independent, authorized, certified research units with authorizations and certificates, granted, among others, by the Welding Institute in Poland as part of the Polish Accreditation Center, the Office of Technical Inspection, the Transport Office of Technical Inspection. Appropriate licenses granted by the Ministry of Infrastructure,

You simply have certainty.