Titanium Sykkel Bossi Grit 60cm

Selges som frame (26.000 NOK), frame set (plus carbon fork og carbon seat tube: 28.500 NOK), eller som komplet sykkel (GRX Di2 2x12 groupset og DT Swiss C1800 Splineline hjul for 77.000 NOK).

Sykkelen er bare testet!

- Compatible with fully integrated and semi-internal routing

- 3AL-2.5V titanium tubing

- 6AL-4V titanium bottom bracket (T47 86mm)

- 6AL-4V titanium head tube

- 6AL-4V titanium 3D printed Sram UDH dropouts

- Butted seat post and down tube

- Hydroformed top tube with flattened underside

- Hydroformed double-ovalised down tube

- 3D printed chain stay yoke

- Toray T800 monocoque carbon flat-mount disc fork

- 50mm fork offset

- Double ovalised chain stays

- Tapered and lowered seat stays

- 3 x bidon mounts

- Clearance for 1L bidon

- Flat mount disc brakes

- 12 x 100mm front and 12 x 142mm rear Thru-axle

- Tapered head tube ZS 44mm upper – 1 1/2” integrated lower

- Mechanical / electronic groupset compatible

- Top tube mounts

- Internal dynamo cable routing

- Internal cable routing

- 27.2mm seatpos

- Laser engraved logos

- Pannier rack mounts on fork and seat stays

- Full fender mounts front and rear

- Clearance for 50c(700c) and 2.2"(650b) tyres

- Brush Finish

- CNC engraved headtube

- Suitable for 700c and 650b wheelsets

NB: Jeg er ikke eieren av sykkelen, det er en venn som bor i Danmark. Så sykkelen kan ikke sees, men den blir kjørt opp eller sendt i posten for kjøper. Hvis du er interessert, vil jeg sette deg i kontakt med kompisen min i DK.