PMC6-XBD Active Reference 3 Way Studio Monitor system

PMC6-XBD Active Reference Studio Monitor system.

Ta kontakt for info og tilbud!

Vi har et system på lager for rask levering!

3-way active, twin cabinet, mid-field reference monitor with ATL bass loading
Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
State-of-the-art Class-D amplifiers: HF 200W, LF 200W, SUB(XBD) 300W
Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
Digital ‘through’ output (AES3 24-bit 96kHz)
SoundAlign network control interface for single or group EQ & settings
Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options



In the case of the PMC6, the bass response of the resulting XBD monitor combination is extended from 39Hz down to 25Hz — giving genuine midfield monitor performance in a compact installation — and the speaker becomes a true three-way design. Also, since the mid-bass driver no longer handles the lowest bass frequencies, distortion is reduced, headroom is extended, and the mid-range frequencies gain extra clarity to lend vocals still greater realism and depth.

It’s simple to configure the PMC6 XBD system; connect the input directly to the PMC6, and add an AES3 digital cable to carry the main monitor ‘through’ output down to the PMC8 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign browser-based software via the LAN connection, where both speakers appear as a single PMC6 XBD unit when linked.

PMC 6 SPECIFICATIONS Type:Active 2-way nearfield reference monitor with ATL bass loading Drive Unit Complement:
LF PMC 150mm (6”) studio 6 driver
HF PMC 27mm (1”) soft dome tweeter
Effective ATL Length:1.8m (5.9ft) Frequency Response:39Hz - 25kHz (- 3dB) (@1m full space, on-axis) Sensitivity:+4dBu input signal = 98dB SPL @ 1m Max continuous SPL :106dB @1m

(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL :118dB @1m

(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Directivity:
H +/-60 degrees
V +50/-40 degrees (-6dB off axis @10kHz)

Input :XLR switchable between analogue & digital AES3
Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance

Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz sample rate
- 110 ohm input impedance

Expansion card slot
- For future connectivity upgrades
Ouput :XLR digital AES3 (fixed 24-bit @ 96kHz) Network :RJ45 for use with PMC SoundAlign web interface Features :Level Trim (+/-10dB)
Orientation (portrait, landscape, auto)
High-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS) Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults) Latency :2.4mS Amplifier Power per Channel:
LF 1 x 200Wrms
HF 1 x 200Wrms
Mains :100 - 240VAC auto-switching, 50-60Hz (IEC C14) Power consumption (idle) :35W Power consumption (max) :400W Dimensions:
Cabinet dimensions Portrait
H 400mm (15.7”)
W 215mm (8.5”)
D 372mm (14.6”)
Cabinet dimensions Landscape
H 215mm (8.5”)
W 400mm (15.7”)
D 372mm (14.6”)
Weight:11.1kg (24.4lbs) each

PMC 8 SUB SPECIFICATIONS
Type:Active subwoofer with an 8-inch bass driver and ATL bass loading Drive Unit
State-of-the-art Class-D amplifier: 300W
Complement:
LF PMC 200mm (8”) studio 8 driver
Effective ATL Length: Frequency Response:25Hz - 500Hz (- 3dB) (@1m full space, on-axis) Sensitivity: Max continuous SPL :109dB @1m

Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL :121dB @1m

(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Directivity: Input :XLR switchable between analogue & digital AES3

Analogue input

- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance

Digital input

- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate - 110 ohm input impedance

Expansion card slot

For future connectivity upgrades Ouput :XLR digital AES3 (fixed 24-bit @ 96kHz) Network :RJ45 for use with PMC SoundAlign web interface Features :Level Trim (+/-10dB)
High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS) Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults) Latency :2.4mS Amplifier Power per Channel: Mains :100 - 240VAC auto-switching, 50-60Hz (IEC C14 Power consumption (idle) :25W Power consumption (max) :300W Dimensions:
H 266mm (10.5”)
W 551mm (21.7”)
D 440mm (17.3”)
Weight:18.5kg (40.8lbs) each


The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Featuring one custom eight-inch long-throw bass-driver, the PMC8 SUB is powered by a single 300W Class-D amplifier and controlled by the same powerful DSP engine as our other active models. DSP facilities include sophisticated room boundary equalisation options, parametric EQ, time delay, phase inversion, and the unique XBD mode, all configured via the loudspeaker’s rear panel or the browser-based SoundAlign software.

Active subwoofer with an 8-inch bass driver and ATL bass loading
Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
Max. cont. SPL: 109dB @1m (quarter space value calculated as +3dB from half space measurement.
Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
State-of-the-art Class-D amplifier: 300W
Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
Digital ‘through’ output (AES3 24-bit 96kHz)
SoundAlign network control interface for single or group EQ & settings
Sophisticated DSP driver protection, EQ, and delay/phase options
Dedicated XBD configuration mode