Bildegalleri
AudioControl P2680 EQ
Beskrivelse av varen
Tilstand: Pent brukt - I god stand
Lite brukt i ett større boliganlegg for lyd i flere rom. Forsterkeren er i god stand og tas ut av anlegget for å erstattes av en annen løsning i forbindelse med omlegging av ulike høyttalere.
Tekst fra Audiocontrol sin nettside:
16-Channel High-Power Multi-Zone Amplifier with EQ
The Architect ‘P’ Series superbly complements AudioControl’s popular high-power Architect multi-zone amplifier series, delivering 100 watts RMS per channel into 8 ohms and 200 watts per channel into 4 ohms, all channels driven.
16 channels of high-power amplification are output from the compact 2 U chassis, with the Architect P2660 EQ delivering 100 watts per channel into 8 ohms and 200 watts per channel into 4 ohms, all channels driven. Channel bridging increases power to a remarkable 400 watts into 8 ohms. Benefitting from 35 years of proprietary AudioControl cool-running amplifier design, the Architect P2660 EQ is equipped with features like input bussing, output pass-through, global 12 VDC trigger in/out with local 12 VDC trigger inputs for all zones, and input signal sensing on/off. Bus A includes a coaxial S/PDIF input for a digital source. Amplifier channels and connected loudspeakers are protected by AudioControl’s fast-acting LightDrive anti-clipping circuitry. AudioControl’s legendary equalization controls are easily accessible from the front panel and may be covered with an included magnetic security panel once the system is dialed in.
Available in a robust black powder coat finish, the Architect Model P2680 EQ is designed, engineered, and manufactured at AudioControl facilities located in Seattle, USA. The Architect ‘P’ series is covered by AudioControl’s legendary 5-year warranty and is available exclusively to the residential, custom install, and Pro Audio markets through AudioControl authorized dealers.
INPUTS
Inputs: 8 Stereo Local Analog Inputs, 1 Stereo Bus Coaxial Digital Input, 1 Stereo Bus Analog Input
Input Sensitivity: Variable 0 to 1 Vrms
Analog Input Sensitivity: 1 Vrms for full output; level at maximum CONTROL
Remote Power Trigger: +12 VDC or Dry Contact Closure, 2 x 1/8″ TS mono in/out
OUTPUTS
Amplifier Channels: 16
1 Stereo Bus Analog Loop Output
Power Output (8 Ω): 100 W per channel
Power Output (4 Ω): 200 W per channel
Power Output (Bridged Mono): 400 W
Minimum Speaker Load: 4 Ω AC POWER REQUIREMENTS
Standby: 0.9 W
Idle (main power on, all channels off): 58 W
All channels active: 106 W
All channels 1/8th rated power: 354 W
Full power (20 A residential service limited): 2400 W
Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads
PERFORMANCE
Damping Factor: >300
Signal to Noise: >105 dB, (A-wtd, ref full output)
Crosstalk: >80 dB @ 1kHz
Gain: 30 dB
Analog Input Sensitivity: 1 Vrms for full output, level at maximum
DAC Specifications: 32 to 96 kHz sample rate, 16-/24-bit depth BTU/HR OUTPUT
Standby: 3.1 BTU/hr
Idle (main power on, all channels off): 201 BTU/hr
All channels active: 361 BTU/hr
All channels 1/8th rated power: 470 BTU/hr
Full power (20 A residential service limited): 2124 BTU/hr
EQUALIZER
Centers: 75 Hz, 250 Hz, 700 Hz, 2.5 kHz, 12 kHz
Range: +/- 12 dB WEIGHT & DIMENSIONS
Dimensions: 19″ W (w/rack ears) 17” W (w/o rack ears) x 15.5” D x 3.5″ H (2 U)
Weight: 21.0 lbs. (9.5 kg)
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 17.2.2025 kl. 22:47 ・ FINN-kode: 394168725