Parasound HALO Integrated, HINT

Selger min nydelige og utrolig integrerte forsterker. Går ut i fra at de fleste kjenner til denne og alle gode tester som den har fått igjennom tidene.

Følger med orginal fjernkontroll.

Denne har det meste som f.eks RIAA trinn for platespiller, HT bypass, meget god DAC, osv..

I følge tidligere eier ble denne oppgradert før garanti utløp.

gjerne gi bud, men skambud besvares ikke.

Må hentes hos meg i Hokksund.

Preamp and DAC Features

Latest generation ESS Sabre32 Reference DAC (ES9018K2M)

Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit

USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD

Windows USB drivers for ASIO & WASAPI - Download here

Mac OS does not require any drivers

Coax and optical accept PCM up to 192kHz/24-bit

Analog bass management with high & low pass crossovers

Home theater bypass input for surround sound integration

Front panel subwoofer level control

Dedicated high current headphone amplifier (TI TPA6120)

Phono for MM & MC with 100 Ω or 47k Ω load

Front panel Aux input with automatic +12 dB gain stage

5 pairs RCA line level Analog inputs

1 pair XLR balanced Analog input

Balanced XLR and RCA left and right preamp outputs

1 balanced XLR and 2 RCA subwoofer outputs

Bass & treble controls with relay bypass from remote or front panel

Rear panel IR input and IR loop output jacks

12 Volt input and output to triggers

Back-lit remote control with discrete buttons

0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features

160 Watts x 2 @ 8 Ohms (RMS, both channels driven)

240 Watts x 2 @ 4 Ohms (RMS, both channels driven)

Power amp circuit topology designed by legendary John Curl

Direct amplifier input to bypass preamp section

High bias class A/AB operation

Oversized shielded toroid power transformer

Dual-mono power supply and power amplifier

40,000uF power supply filter capacitance

Matched JFET input stages and MOSFET driver stages

12 high voltage/high current bipolar output transistors

Heavy-duty 24k gold-plated 5-way speaker binding posts

Over temp and short circuit relay protection

Specifications

Power Output - Both channels driven

(0.05% THD, RMS, 20 Hz - 20 kHz)

160 watts x 2 @ 8 Ω

240 watts x 2 @ 4 Ω

Power Output - Both channels driven

(0.9% THD, RMS, 20 Hz - 20 kHz)

180 watts x 2 @ 8 Ω

270 watts x 2 @ 4 Ω

Current Capacity

45 amps peak per channel

Frequency Response

10 Hz - 100 kHz, +0/-3 dB

Total Harmonic Distortion (THD)

< 0.01 %, average listening levels

< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk

> 50 dB at 20 kHz

> 70 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted

Line in: - 103 dB (input shorted)

Digital in: - 106 dB

Amplifier Damping Factor

> 800 at 20 Hz

Preamp Stage Input Sensitivity

300 mV in for 1 V at Pre Out jacks

Total Preamp Stage Gain: 10 dB

Max Output Unbalanced: 7 V

Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity

1 V at Bypass/Amp In for 28 V at Speaker Out

Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance

Input Impedance

MM: 35 dB / 47 k Ω

MC: 52 dB / 47 k Ω or 100 Ω

Input Capacitance

150 pF

High & Low Pass Crossover Slopes

12 dB per octave

Supported DAC Sampling Rates

USB: up to 384 kHz / 32-bit PCM

DSD Native: DSD 64, DSD 128, DSD 256

DSD over PCM (DoP) at 384 kHz

Coax/Opt: up to 192 kHz / 24-bit PCM

Digital to Analog Converter

ESS Sabre32 Reference ES9018K2M

384 kHz / 32-bit

USB 2.0 Controller

VIA VT1731, 384 kHz / 32-bit

Headphone Amplifier

Texas Instruments TPA6120A

Output Impedance 10 ohms

XLR Pin Identification

1 = Ground (Shield)

2 = Positive

3 = Negative (Return)

Input Impedance

Unbalanced: 24 k Ω

Balanced: 100 k Ω per leg

Output Impedance

Unbalanced: 100 Ω

Balanced: 470 Ω per leg

Dimensions

Width: 17-1/4" (437 mm)

Depth: 16-1/4" (413 mm)

Depth, with cables 17-1/4" (437 mm)

Height, with feet: 5-7/8" (150 mm)

Height, without feet: 5-1/4" (133 mm), 3U

Net Weight

33 lb. (15 kg)

Shipping Weight

45 lb. (20.4 kg)

Power Requirement

Standby: 0.5 watts

Idling power: 70 watts

Maximum: 750 watts

110-125 VAC 60 Hz or 220-250 VAC 50 Hz

AC mains voltage is set on rear