Bildegalleri
esun High Temp Resin 0.5L – Klar
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Har en del av denne liggende. Er over 1 år, men testet og fungerer helt supert.
Veil pris er 479kr pr 0.5 l
High Temp Resin has the characteristics of high hardness, high strength, high modulus, and high precision. The resin heat resistance is good;Resistance to long-term heating at 120°C or boiling at 100°C.The fully cured high temperature resin material has excellent mechanical properties, weather resistance and temperature resistance.
Description
High Temp Resin can be Used in medical, dental, automotive, consumer electronics and other models that require temperature resistance or strength. High temperature resin can be used for high temperature dental film and meet the refined needs of dental model assembly manufacturing, withstand high temperature and in low deformation.
Sellingpoint
Heat resistance
High precision
High hardness
High strength
High rigidity
Tech Info
3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESIN High Temp Resin
Viscosity(mPa·s) 180-220
Density(g/cm3) 1.09-1.10
Tensile Strength(MPa) 70-85
Elongation at Break(%) 35-40
Flexural Strength(MPa) 95-105
Impact Strength(J/m) /
Tearing Strength(GPa) /
Heat Distortion Temp(℃) 100.5(After printing, place in a 150℃ oven for 30 minutes)
Hardness(Shore D) 82-84
Grades (out of 10)
Strength（S） 10
Toughness（F） 8
Forming（P） 8
Accuracy（S） 7
Speed （A） 8
Recommended printing parameters
Settings Machine Type
Low Light Intensity Medium Light Intensity High Light Intensity (Monochrome LCD Screen)
Representative Machine AnyCubic Photon eSUN LCD 3.0
Nova Bene 4
Creality LD-002R Anycubic MONO X
ELEGOO Saturn
Phrozen Sonic Mini
Exposure Time/s 8-10 5-6 Not recommended
Bottom Layer Count 3-5
Bottom Exposure Time 40-60 30-40 Not recommended
Lifting Distance/mm 5.5&6-inch screen：5-6 or Higher; 8.9&13.3-inch screen：8-12 or Higher
Lift Speed/mm·min-1 90-150 90-120 Not recommended
Retract Speed/mm·min-1 150-200
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 2.3.2025 kl. 07:57 ・ FINN-kode: 395925711
