Audioquest Diamondback XLR, balanserte signalkabler, 2x1m

Audioquest Diamondback XLR, balanserte signalkabler

2x1m

The AudioQuest Diamondback XLR Male to XLR Female Cable (3.3') is designed to reduce distortion in your signal. To achieve this, the audio cable utilizes solid perfect-surface copper+ conductors in a triple-balanced geometry with polyethylene airtube insulation, a carbon-based 2-layer noise dissipation system, and cold-welded connectors.

The solid perfect-surface copper conductors have less oxides, less impurities, and less grain boundaries than industry standard oxygen-free high-conductivity copper, which reduces the amount of magnetic and electrical interference within the cable. The triple-balanced geometry ensures that both the negative and positive signals within the cable have equally low distortion conducting paths and that the coverage shield is not used as a conductor. The polyethylene air-tube insulation creates an air insulator around the conductors which significantly reduces the absorption of energy and presence of distortion in the cable. The carbon-based 2-layer noise-dissipation system blocks most RF interference from entering the ground plane of the cable. The use of high pressure cold-weld connections with copper-impregnated paste ensures that the joints between the cable and hardware have a reduced influence on the signal clarity. All of these features combine to provide you with an audio cable with reduced distortion and better signal fidelity.

Solid Perfect-Surface Copper+ Conductors

The solid perfect-surface copper+ conductors have less oxides, less impurities, and less grain boundaries than industry standard oxygen-free high-conductivity copper and therefore causes less magnetic and electrical interference within the cable

Polyethylene Air-Tube Insulation

The polyethylene air-tube insulation creates an air insulator around the conductors which significantly reduces the absorption of energy and presence of distortion in the cable

Carbon-Based 2-Layer Noise Dissipation System

The carbon-based 2-layer noise dissipation system blocks most RF interference from entering the ground plane of the cable

Triple-Balanced Geometry

The triple-balanced geometry of the cable ensures that both the negative and positive signals within the cable have equally low distortion conducting paths and that the coverage shield is not used as a conductor

Cold-Weld

Unlike traditional hot solder joints, the cable uses high pressure copper-impregnated paste cold-weld connections