Utsalg !!! Inverter sveise apparat 260A IGBT PM-MMA-260SN TIG-Lift

Siste stk på lager !!!!

Kampanje pris inkl.moms 1100 kr !!!

The welder has the option of TIG welding after using an appropriate welding torch.

After its installation, the welder changes into a TIG welder while maintaining many parameters of expensive TIG devices.

PARAMETERS:

Power supply: 230V / 50Hz

Idle voltage: 66V

Welding current range: 20-260A

Welding with electrodes in the range: 1.6 - 4.0 mm

Power consumption: 7.4kVA

Rated welding current: 260A

Rated Duty Cycle: 60%

Welding current at 100% duty cycle: 203A

Working voltage: 20.8– 30V

Protection class: F.

Insulation class: IP21S

Power cord: 155cm

Welder weight: 2.55 kg

EQUIPMENT

welder

mass cable (160cm)

welding cable (160cm)

welding mask

hammer with a brush

DESCRIPTION

The PM-MMA-260SN model is an inverter welder, the design of which is based on efficient IGBT transistors. It is equipped with an LCD display showing the current welding current, set with a knob with smooth adjustment.

The welder is equipped with a fan cooling the electronic systems and other components - the "Turbo FAN" function, as well as a thermal sensor that protects the device against overheating.

EFFICIENCY AND CAPABILITIES

High performance and effective cooling

Thanks to the use of a large fan in the small housing of the welder, the air flow was increased, which lowered the temperature of the transistors. The device's efficiency is as high as 60%.

Built-in automatic functions to make your work easier

HOT START, commonly known as hot start, enables the welding current to be temporarily increased above the value set by the welder. HOT START works when the arc is struck and is designed to prevent the electrode from sticking to the material. It is a great help when lighting the electrode.

ANTI STICK cuts off / minimizes welding voltage and current in the event of a short-circuit between the electrode and the material being welded. ANTI STICK allows the welder to detach the electrode more easily.

ARC FORCE stabilizes the bow regardless of its length. By reducing the value of the function, it gives a soft arc and a smaller penetration depth, while increasing the value of the function causes deeper penetration and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "push the electrode into the molten metal pool and burn through the material. This model has automatic ARC FORCE control.

Universal and compact design

The device welds with currents from 20 to 260A, allows you to weld with an electrode with a diameter of 1.6mm to 4mm.

The IGBT transistor combines the advantages of two types of transistors, the ease of control of field effect transistors and the high breakdown voltage and switching speed of bipolar transistors. Welding with a 1.6mm electrode is already possible when using a 16A class C class slow-blow fuse. Operation at a maximum current of 260A requires a protection of at least 20A.

The weight of the welder is only 2.55 kg, which makes it very handy.

The welder has standard EURO copper connectors for welding cables. Thanks to the EURO standard, you can easily select additional replacement welding cables.