250 kr
![Dell PowerEdge R730/Precision R7910 CPU kjøleribbe](https://images.finncdn.no/dynamic/480x480c//2024/1/vertical-0/12/0/335/909/620_152707551.jpg)
Type: Annet
Nypris 10.800 US$ + frakt og MVA. Kun testet og brukt 2-3 ganger som nytt i originalesker
Har 3 stk til salgs 2 stk SX versjon og 1 Stk GX versjon. alle med 32 GB ram.
Pris er pr stk. Ved kjøp av alle 3 kort kun 150.000,- inkl. mva.
Inspired by the demands of AI, Data Center, and High Performance Computing, Terasic’s DE10-PRO is purpose-built for acceleration and high-speed connectivity applications to address the demands of the next-generation high-performance systems.
The board itself takes advantage of the latest Intel® Stratix® 10 to obtain speed and power breakthrough (with up to 70% lower power). Also, armed with 32GB DDR4 memory module running at over 150 Gbps, up to 15.754 GB/s data transfer via PCIe Gen 3 x16 edge between FPGA and host PC, and 4 on-board QSFP28 (100GbE) connectors, the board delivers more than 2X the performance of previous generation acceleration cards.
The DE10-PRO fully supports Intel Open VINO™ toolkit to provide optimal Computer Vision and Deep Learning solutions. Our clients' systems can achieve highest computing performance and lowest cost for their AI applications by leveraging the Stratix® 10 FPGA on DE10-PRO.
Inneholder:
DE10-Pro Development Board
DDR4 ECC SO-DIMM Module x4 (Installed) Totalt 32 GB RAM
PCIe Bracket (Installed)
Air Cooler (Installed)
Power Supply & Power Cable
AC Power Cord
USB to Micro USB Cable
Screw & Copper Pillar Package
DE10-Pro Quick Start Guide
DE10-Pro
FPGA
Intel Stratix 10 GX/SX FPGA
FPGA Configuration
On-Board USB Blaster II or JTAG header for FPGA programming
Avalon-ST (AVST x8) configuration via MAX V CPLD and CFI flash memory
Memory
128MB FLASH
Up to 8 GB DDR4 2666/2400(FPGA Core Speed 1/2 FPGA) for each socket
Communication and Expansion
Four QSFP28 connectors for 100/40/25/10 GbE network interface
PCI Express Gen3 x16 edge connector (includes PCIe drivers)
2x5 Timing expansion header
Others
General user input / output:
4 LEDs
2 push-buttons
2 slide switches
U.FL clock input / output
On-Board Clock
50MHz Oscillator
Programmable Clock Generator
System Monitor and Control
Temperature sensor
Power Monitor
Fan control
Power
PCI Express 2x4 power connector for 12V DC Input
PCI Express edge connector power
Mechanical Specification
PCI Express standard height and 3/4-length
Supported Memory Modules for Sockets
DDR4-2666/2400 for FPGA Core Speed 1/2 FPGA
QDRII+ 550MHz 144MBits
QDRIV 1066MHz 144MBits
Block Diagram
Note, DDR4A is shared with FPGA and HPS.
Memory Sockets
The four DDR4 SODIMM sockets are divided into two groups.
For better user flexibility, two different memory modules can be inserted separately in right & left groups. For example, users can insert two DDR4 modules on the right side and two QDRII+ SRAM modules on the left side.
Limitation: The two SODIMM sockets must be inserted with the same memory to prevent dysfunction on memory module that requires higher voltage.
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingSist endret: 5.7.2024, 19:40 ・ FINN-kode: 263362530
Betalt plassering