Intellijel Metropolix med GX og USB Extender 1U/3U (RESERVERT)

Intellijel Metropolix med GX og USB Extender 1U/3U eurorack -modul selges.

Kommer i original eske/emballasje med strømkabel + skruer.

Modulen kan hentes på Ensjø i Oslo etter avtale (betales med vipps), eller sende med fiks ferdig.

Metropolix is the new version of the well-known Metropolis sequencer. The new features as well as the two new tracks are quite respectable and the expandability through expanders leaves hardly anything to be desired.

The two new tracks (TRK1 and TRK2) represent variants of the master pitch/gate sequencer. Each track interprets the master sequence in a different way and creates complementary sequence variations with which you can create counterpoint, polyrhythms and all kinds of sound movements. Each of these tracks has its own playback order (ORDER), sequence length (LENgth), beat division (DIVision), SWING portion (SWING), SLIDE time (SLIDE), and track GATE lengths (GATE). Other track-based sequence variables are accessible from the TRACK MENU and include pitch slider inversion, sequence note range, track transposition, and other functions. In addition, there are eight modulation tracks with their own running directions and clock subdivisions. These can be freely applied to internal parameters or tapped via the two modulation outputs. The AUX input trio allows you to feed in three modulation sources and freely assign them to different parameters. In the new loopy mode, the stage buttons can be played as a keyboard and short subsequences can be fired. Sequences and other settings can be stored and recalled in a total of 64 preset slots. If that's not enough, you can expand Metropolix with eight additional gate outputs using the Gx or Qx Expander.

Intelligel Designs GX

Expander for the Metropolix (available under Article Nr 514054 (not included))

Extends the Metropolix sequencer with an extra 8 configurable gate/trigger outputs

Power requirement: 8 mA (+12 V) / 0 mA (-12 V)

Width: 4 HP

Depth: 22 mm

Intellijel Designs - USB Extender 1U + 3U

This module provides a simplified USB connection for the Metropolix sequencer, which is now equipped with full MIDI implementation. On top of that this practical module can be converted from 3U to1U.

The USB Extender Module is connected to the Metropolix with a cable on the backside of the Metropolix whose Micro-USB port is thus made available on the front side with a standard USB port for connection to a USB host (e.g. computer DAW). The 1U conversion comes without bells and whistles, the 3U variety comes with a passive mult.

Of course USB Extender can be used with any module that has an USB connection on its back.

mer info her:

https://www.thomannmusic.no/intellijel_designs_metropolix.htm

https://www.thomannmusic.no/intellijel_designs_usb_extender_1u_3u.htm

https://www.thomannmusic.no/intellijel_designs_gx.htm