Bildegalleri
(1/1)
TUMBLING BULL (WR-02G)
Til salgs1 490 kr
Beskrivelse
An Oldie, but a Goodie!
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver’s seat and big overarching fenders on the rear wheels. A realistic driver figure is included in the kit to round off the look! The model runs on the rear wheel-drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
Fun wheelie action with the rear-wheel drive WR-02G!
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model’s rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
Specifications
?Length: 345mm?Width: 253mm?Height: 235mm
?Weight: 1310g (not including R/C equipment or battery pack）
?Wheelbase: 170mm
?Tread: 189mm (Front), 195mm (Rear)
?Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
?Resin Monocoque Frame
?Rear-Wheel 2WD
?4-Wheel Double Wishbone Suspension
?Front/Rear Friction Dampers
?2-Piece Steering Tie Rod
?3-Bevel Differentials
?Gear Ratio: 18.3:1
?Type 540 Motor
?Electronic speed controller
Separately Required Items
?2-Channel R/C System
?R6/AA/UM3 batteries for transmitter
?Battery Pack & Charger
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver’s seat and big overarching fenders on the rear wheels. A realistic driver figure is included in the kit to round off the look! The model runs on the rear wheel-drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
Fun wheelie action with the rear-wheel drive WR-02G!
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model’s rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
Specifications
?Length: 345mm?Width: 253mm?Height: 235mm
?Weight: 1310g (not including R/C equipment or battery pack）
?Wheelbase: 170mm
?Tread: 189mm (Front), 195mm (Rear)
?Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
?Resin Monocoque Frame
?Rear-Wheel 2WD
?4-Wheel Double Wishbone Suspension
?Front/Rear Friction Dampers
?2-Piece Steering Tie Rod
?3-Bevel Differentials
?Gear Ratio: 18.3:1
?Type 540 Motor
?Electronic speed controller
Separately Required Items
?2-Channel R/C System
?R6/AA/UM3 batteries for transmitter
?Battery Pack & Charger
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
Vi fokuserer på klassisk teknisk hobby.
Radiostyrte biler, båter, fly, plastbyggesett og mye mye mer!
Vi fører mange av de største og mest aktuelle merkene.
Kjøp på nett, hent i butikk eller få varene sendt hjem i postkassen.
Frakt fra kroner 69,-
MERK AT ENKELTE VARER KAN VÆRE PÅ LAGER I BUTIKK SELV OM DE ER UTSOLGT PÅ NETT.
Alle tilbud på nettsiden får du også i butikk dersom disse er lagervare i butikk.
Velkommen til en hyggelig hendel :)
Besøksadresse:
Hobbyco AS
Strømsveien 48
2010 Strømmen
Åpningstider:
Mandag til Fredag: 12:00 – 18:00
Lørdag: 11:00 – til 15:00
Søndag: Stengt
Telefon 63 80 00 80
E-post: post@hobbyco.no
Radiostyrte biler, båter, fly, plastbyggesett og mye mye mer!
Vi fører mange av de største og mest aktuelle merkene.
Kjøp på nett, hent i butikk eller få varene sendt hjem i postkassen.
Frakt fra kroner 69,-
MERK AT ENKELTE VARER KAN VÆRE PÅ LAGER I BUTIKK SELV OM DE ER UTSOLGT PÅ NETT.
Alle tilbud på nettsiden får du også i butikk dersom disse er lagervare i butikk.
Velkommen til en hyggelig hendel :)
Besøksadresse:
Hobbyco AS
Strømsveien 48
2010 Strømmen
Åpningstider:
Mandag til Fredag: 12:00 – 18:00
Lørdag: 11:00 – til 15:00
Søndag: Stengt
Telefon 63 80 00 80
E-post: post@hobbyco.no
Beliggenhet
Hobbyco AS
| FINN-kode | 224688054 |
|---|---|
| Sist endret | 3.8.2021 kl. 16:44 |
