Gainlab Audio Bishop-All Tube Channelstrip

Vi kjører kampanjepris på noen fåp lagerførte Gainlab Audio Bishop-All Tube Channelstrip.

NB:Ta kontakt på mail eller telefon for å få annonsert pris!

GLA-MC1 aka. BISHOP

We are proud to announce that the new family member of Gainlab Audio products has arrived! Our own designed BISHOP all tube channel unit brings much more than you expect from a regular high quality channel strip. The heart of the unit based on the mic preamp which consist three vacuum tubes constructed in all tube design. There are inputs for the mic and instrument on the front while mic and line also selectable on back panel. Over the regular switches of phase, polarity and phantom power we found a special drive pot which is available for colouring the instrument input through a discrete solution. The big enlighted eye catching ring for stepped gain selector is separated in two selectable scales which gives ultimate capabilities to make gain even until +60dB.


Main Properties

All tube preamp section
Full balanced signal path
Dual Slope Optical Compressor
Mic, Instrument and Line input
HPF at 120Hz, 80Hz
48V phantom power
Phase switch – Pad switch
Instrument drive
Dual ring steped gain selector

Low gain mode +40dB
High gain mode +60dB
Output VU meter
Character selector
Timeing selector
Threshold control
Dynamic Air band
2nd slope control
Dual GR LED bar

INPUT: Combo Balanced XLR/Jack, Rear Panel XLR
OUTPUT: Balanced XLR
Input Options: Microphone, Instrument, Line
input impedance: >10Kohm
Frequency response: 20Hz-20Khz +/- 1dB
Size: 483x280x89
Weight: 5.2 Kg

MPRESS 2×3 Band Tube Equalizer

What would be your first though when you hear the term “passive equalizer”? At first, probably you think about the airy high frequency components, the rich subs and the widely applicable cuts and boosts wich can be used alongside each other. These types of equalisers have been around since the early 50’s, the most famous Pultec EQP-1 from Pulse Techniques was the first one that provided simultaneously passive filter circuits alongside high quality line amplifiers. The downside of the EQP-1 was the lack of ability to carry out precision frequency isolation, but it was able to change any sound in its core. Many of the modern equalizers are based on the original EQP-1 in both structure and functions that could be limiting in a modern music environment and production.

Field of application

Mixing
Mastering
Recording
Sound Design
Saturator

Main properties

2×3 band setup
Stepped attenuator design
Tube based gain stage
Military grade vacuum tubes
Nanocrystaline alloy transformers

GLA-TC1 aka. The DICTATOR
The Dictator is a tube based dynamic controller wich is designed after a classic vari-mu compressors. Theoretically similar to the legendary Fairchild 670 and Gates STA-Level in addition to the contemporary solutions in order to have a better control over the sound. The bespoke design of the branch circuits we just simply call the “mu-follower”. The two channels of the compressor can provide synchronised running throughout the whole range of the transition curve and so excellent gain reduction can be achieved. The time wise working parameters and the saturation characteristics are very familiar to the known tube based compressors.

Field of application

Master compressor
Bus compressor
Tracking compressor
Sound Design
Saturator

Main properties

True dual pentode tube design
Contemporary side chain design
Modern line driver
Military grade vacuum tubes (6k4p-EV (6?4?-EB) long life pentode)
Permalloy transformers