Bildegalleri
(1/1)
Montarbo MB-120 FØRPRIS KR.3528,-
Til salgs3 086 kr
Beskrivelse
Produktinfo
Model
MB-120
Rated Power Output
120W
Speaker Outputs
70V, 100V & 4~16O
Input Sensitivity & Impedance
MIC 1, 2, 3: 5mV/600O, Unbalanced phone jack input
MIC 2, 3: 775mV/10KO, Unbalanced RCA input
AUX 1, 2: 350mV/10KO, Unbalanced RCA input
EMC: 775mV/10KO, Unbalanced RCA input
Output Sensitivity & Impedance
MIX OUT: 1000mV/470O, Unbalanced RCA output
Tone
Bass: 10dB at 100Hz
Treble: 10dB at 10KHz
Frequency Response
50Hz~16KHz(+1dB, -3dB)
S/N Ratio
MIC 1, 2, 3: 66dB; AUX 1, 2: 80dB
THD
Less than 0.5% at 1KHz, 1/3 rated power
Muting Function
MIC 1 overrides other input signals
with 0-30 dB attenuation
Crosstalk
=50dB
Cooling
Fan automatically start up when temp reaches 55?
Protection
High temp, overload & short-circuit
Power Supply
~110V/60Hz or ~230V/50Hz or DC 24V
Power Consumption
200 W
Weight
9.3Kg
Dimensions
484x335x88mm
Finish
Panel: aluminum plate, black
Case: steel plate, black
Descriptions The basic public address mixer amplifiers have power ratings from 30W, 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 microphone inputs, 2 aux inputs and 2 EMC inputs. Priority muting is achieved via EMC1-2 for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp. Features Mixer amplifier for paging and background music system Rated power from 30W, 60W, 120W, 240W, 350W, 500W to 650W 2U rack mount (less than 350W) and 3U rack mount design 70V, 100V and low impedance 4-16ohm speaker output Three Mic inputs by phone jack type Mic 1 with VOX priority and VOX level on front panel Mic 2-3 by phone jack on rear panel Two Aux Inputs and 2 line inputs for spare use Two EMC priority inputs EMC1 has priority over all inputs except MIC1 Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control Short circuit, overload and high temp protection Optional DC 24V available on less than 500W models Panel with/without handhold Faults monitoring module, it can output short circuit signal to achieve main/spare amplifier switch
Model
MB-120
Rated Power Output
120W
Speaker Outputs
70V, 100V & 4~16O
Input Sensitivity & Impedance
MIC 1, 2, 3: 5mV/600O, Unbalanced phone jack input
MIC 2, 3: 775mV/10KO, Unbalanced RCA input
AUX 1, 2: 350mV/10KO, Unbalanced RCA input
EMC: 775mV/10KO, Unbalanced RCA input
Output Sensitivity & Impedance
MIX OUT: 1000mV/470O, Unbalanced RCA output
Tone
Bass: 10dB at 100Hz
Treble: 10dB at 10KHz
Frequency Response
50Hz~16KHz(+1dB, -3dB)
S/N Ratio
MIC 1, 2, 3: 66dB; AUX 1, 2: 80dB
THD
Less than 0.5% at 1KHz, 1/3 rated power
Muting Function
MIC 1 overrides other input signals
with 0-30 dB attenuation
Crosstalk
=50dB
Cooling
Fan automatically start up when temp reaches 55?
Protection
High temp, overload & short-circuit
Power Supply
~110V/60Hz or ~230V/50Hz or DC 24V
Power Consumption
200 W
Weight
9.3Kg
Dimensions
484x335x88mm
Finish
Panel: aluminum plate, black
Case: steel plate, black
Descriptions The basic public address mixer amplifiers have power ratings from 30W, 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 microphone inputs, 2 aux inputs and 2 EMC inputs. Priority muting is achieved via EMC1-2 for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp. Features Mixer amplifier for paging and background music system Rated power from 30W, 60W, 120W, 240W, 350W, 500W to 650W 2U rack mount (less than 350W) and 3U rack mount design 70V, 100V and low impedance 4-16ohm speaker output Three Mic inputs by phone jack type Mic 1 with VOX priority and VOX level on front panel Mic 2-3 by phone jack on rear panel Two Aux Inputs and 2 line inputs for spare use Two EMC priority inputs EMC1 has priority over all inputs except MIC1 Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control Short circuit, overload and high temp protection Optional DC 24V available on less than 500W models Panel with/without handhold Faults monitoring module, it can output short circuit signal to achieve main/spare amplifier switch
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
Dette produktet kan kjøpes direkte i vår nettbutikk www.idmusikk.no På våre sider finner du over 4000 produkter fra de mest kjente produsentene verden over. Alt til konkurransedyktige priser. Velkommen til en hyggelig handel!
Beliggenhet
FINN-kode | 71347298 |
---|---|
Sist endret | 17.2.2016 kl. 14:10 |