Kupp!! Kantlistmaskin SCM ME 40 TR - NY

Koster 470 000 kr NY

KOMPLETT kantlistmaskin SCM ME 40 TR

Utstillings modell

Maskinen er satt opp for testkjøring

Teknikkere fra Bergsli har gjort en gjennomgang av maskinen.

Maskinen har kant avrundnings aggregat

Maskinen er ekstra utstyrt med PUR lim potte

PUR Lim følger med

Teknisk informasjon:

1 SCM automatic edge banding machine

Model me 40tr in CE version exhibition machine (NEW)

Technical data:

Work table dimensions 3465 x 710 mm

Work table height 875 mm

Gluing thickness of roller edges 0,4 ÷ 3 mm

Glueing thickness strip edges fino a 5 mm

min. ÷ max. workpiece thickness 8 ÷ 50 mm

min. Workpiece length/workpiece width with roller edges 190/110 mm

min. Length of panel (if only front trimmed) 120 mm

Feed speed 9 m/min

Feed motor power S1 0.55 kW

Working air pressure of pneumatic system 6.5 bar

Suction bonnet (glue container) diameter 80 mm

2 suction bonnets (flush trimming unit) diameter 60 mm

2 suction bonnets (pre-milling unit) diameter 80 mm

Working temperature 20 ÷ 190°C

Standard equipment:

- Execution according to safety regulations

- PRE-MILLING UNIT, consisting of 2 diamond tools with 80 mm diameter, enables excellent linearity and

finishing of the plate in the pre-treatment. The unit is equipped with an independent suction system and a compressed air nozzle for cleaning the plate.

the plate. Possibility of vertical adjustment of the tools to fully exploit their cutting capacity.

- GLUE REGULATORY, APPLYING AND RETENTION OF THE EDGE includes:

Glue container (for hot-melt glue), Teflon-coated on the inside for easier glue changes.

Applicator roller with a resistance element inside for a constant glue temperature

Temperature adjustment of the applied glue via PLC

Device for recycling unused glue

Automatic application of roller edges with trimming knife for edges up to 3 mm

Turntable with diameter 730 mm

Pressure rollers with 2 steel rollers, conically offset from each other

Temperature reduction in the glue pot when not in use (stand-by mode)

Self-lubrication of the glue pot

- CAPPAGGREGAT for separation to 90° of the protruding edge at the front and back.

- FOLDER with high-frequency motor, with horizontal rotating tracing rollers, with polished and chrome-plated surfaces and

vertical touch rollers for perfect tool positioning. The aggregate is complete with combi cutter diameter 55.3 mm: part of the

cutting edge is for flush milling of radius edges (2 mm or on request 3 mm) and thin bevelled edges. The straight part of the

is suitable for wood edges up to 5 mm. For a change of processing from radius edge to wood edge it is sufficient to adjust the cutter axially.

adjust the cutter. The thickness is adjusted via 2 indicators. The unit is equipped with an independent suction system.

- ABRUNDAGGREGAT ( Corner copy) with high-frequency motor for cutting to 90° is operated directly from the control panel.

incl. the following special accessories:

1 SCRAPER UNIT

New scraper unit with numerical positioning indicator.

For finishing the edge of PVC/ABS 2 mm (or other thicknesses on request). The unit ensures

precision thanks to the frontal and vertical feeler rollers that ensure precise tool positioning at the

positioning of the tool at the working point. Pair of milling cutters included (R= 2 mm standard; other thicknesses on

on request). Manual removal of the aggregate.

1 SWIVELING AGGRIGATE

With two independent motors (0,14kW 2800 rpm) for cleaning and polishing the edge. Swivelling

and height-adjustable motors to optimise cleaning and polishing.

1 SURFACE SCRAPER

New surface scraper with rotating copying device. Allows the removal of

glue residues on the board and improves board cleanliness.

1 Automatic application of strip edges with edge magazine

1 Kit for quick change of the glue container

1 Device for heating the panel edge

The device is positioned in front of the gluing unit and heats the panels for better adhesion.

Especially recommended when using the machine in a cold environment.

1 Anti-adhesive spray unit

Positioned in front of the jointing unit, prevents glue from adhering to the top and bottom of the workpiece

and facilitates cleaning. Complete with 2 sprayers and a storage container.

1 Sprayer for finishing the edge

Positioned in front of the surface scraper and/or buffing unit, enables better

panel cleaning and polishing of the applied edge.

1 glue pot 888160 for PUR Glue