(1/3)

YBA Signature Power Amp

Tilstand: Helt ny - Uåpnet/med lapp

Hig end power amp fra franske YBA

The circuit used in this YBA amplifier is completely symmetrical; this cancels any defects introduced via the power source, minimizes parasitic ground currents and avoids any need for passive components in the signal path.

The number of components has been minimized; the signal traverses only transistors. No passive components alter the original purity of the musical signal. The input stage is of the complementary double differential type; it is followed by a pre-driver stage, which allows the adaptation of the impedance and initial amplification of voltage. The pre- driver stage is followed by a third stage, which completes the amplification of voltage; it distributes the current and voltage necessary to the output stage, which is directly coupled to the speakers.

The geometry of the circuit has been optimized to reduce the distances between components and the connecting wires to the absolute minimum: only a few centimetres at the input and output of the

amplifier. The transformers are suspended in order to reduce the transmission of their vibrations to the rest of the amplifier.

Product type Stereo power amplifier

Audio Outputs 2 Pairs Speaker Outputs

Power Outputs Stereo 200W @ 8 Ohms per channel

Stereo 400W @ 4 Ohms per channel

Mono 600W @ 8 Ohms bridged

SNR >95dB

Frequency Response 20Hz – 20kHz (-0.5dB)

THD+N (20Hz - 20kHz) <0.1%

Inputs 1 RCA, 1 Balanced Input (Stereo)

1 Balanced Input (Mono)

Power Supply Linear power supply with high performance UICore