Diagnoseverktøy, Feilkodeleser Foxwell Gt60 plus till leie

Døgn leie: 250kr -- 2 Døgn: 400kr -- 7 Døgn: 600kr. Deposit - 2000kr.

Foxwell GT60 Plus Function List:

Basic Diagnostic Functions:

Reading Codes: Lets you read trouble codes found in the control unit.

Erasing Codes & Reset: lets you to clear all current and stored DTCs from a selected control module.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer:

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Scan VIN:allows identifying a vehicle by scanning the VIN plate of the vehicle, barcode, QR code or photo recognition. 

Special Functions:

---Oil Light Reset: This function is required when you are alerted that your vehicle is due for a service. It allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

---EPB:It allows you to perform the service and maintenance, including deactivation and activation of the brake control system, bleeding,opening and closing brake pads, and setting brakes after disc or pad replacement

---TPS:Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA).

---TPMS:It service allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

---BRT: Battery Reset. The function lets you to validate new battery, clear faults from the dashboard and display current battery details of the vehicle such as A-udi, BM-W, Citroen, Peugeot, Seat, Skoda, V-olvo, V-W and Ford.

---DPF: This function specially works for Diesel Particulate Filter system with DPF regeneration, lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter.

---SAS: helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

---CVT, Continuous Variable Transmission, this function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.

---Odometer: This function allows you to revise the date of odometer and write the original date into new odometer.

---Key Fob Programming Only works for older vehicle