NEVE 1073 DPD dual preamp med digital ut

Denne brukes for lite så jeg vurderer å selge den. Etter at jeg kjøpte den har den stått i et rack, selvfølgelig røykfritt.

The 1073DPD 2-channel Mic/Line Preamp at a glance:

Line/mic level control with 80dB of gain on tap

Hi-/Lo-Z switch: switches impedance of the transformer-coupled input stage between 1200Ω (hi-Z) and 300Ω (lo-Z)

48V button: applies 48V phantom power to the XLR mic inputs

Phase button: polarity reverse (180° phase), pre line output

Trim control: +/–10dB trim control for transformer-balanced Class A output stage

Clip LED: peak LED illuminates 3–4dB below clipping

Format switch: selects between 44.1kHz PCM range, 48kHz PCM range, or DSD

Sample Rate switch: selects which multiple of sampling rate to use (48kHz, 96kHz, or 192kHz)

ADC In: 1/4-inch jack acts as a switched insert into the ADC input

AES Sync: female XLR accepts standard AES 110Ω input signal for use as a word clock sync source

Out 1/L and 2/R: male XLRs outputting standard AES 110Ω digital audio

WCLK In: BNC input for TTL-level word clock signal; input impedance may be set to 75Ω using adjacent DIP switch

WCLK Out: BNC 75Ω outputs TTL-level word clock signal at sampling frequency, buffered from ADC sync source

DSD L and R: BNC 75Ω outputs TTL-level DSD signals

75R On/Off DIP switch: selects a 75Ω input impedance for WCLK In

SDIF 2/3 DIP switch: selects DSD output format (SDIF2, DSD data only; SDIF3, DSD data with embedded clock.

Kontakt Tron for mer info 9201 3839

Står på Skjetten men kan sendes over hele landet.