Sveiseapparat inverter 330 A

330 ampere (max) Inverter sveiseapparat.

Helt nytt i eske. Jeg har et helt likt apparat som jeg bruker selv.

Det har Hot start, anti stick og arc force teknologi.

Med tilbehør, slagghakke og sveisemaske.

Tekniske data:

TECHNICAL DATA

Welding method: MMA

Power supply: 230V/50Hz

Power consumption: 6.7 kVA

Welding current range: 20 - 330 [A]

Welding current, 100% duty cycle: 255 A

Welding current, duty cycle 60%: 330 A

Rated duty cycle: 60%

Electrode wire diameter: 1.6 - 4 mm

Insulation class: F

Degree of protection: IP21S

Power cable length: 185 cm

Device weight: 2.15 kg

KIT CONTENTS

POWERMAT welding machine

Ground cable (195 cm)

Welding cable (188 cm)

Welding mask

Hammer with brush

Original packaging

User manual in Polish

The welding machine is an inverter welder whose design is based on efficient IGBT transistors . It is equipped with a clear LCD display indicating the current welding current set by buttons.

The welder is equipped with a fan to cool the electronics and other components, as well as a thermal sensor to protect the device from overheating.

Built-in automatic functions to make your work easier:

HOT START, popularly called hot start, enables a momentary increase in welding current above the value set by the welder. HOT START operates at the moment of arc ignition and is intended to prevent the electrode from sticking to the material. It is a great convenience when igniting the electrode.

ANTI STICK cuts off/minimizes the welding voltage and current in the event of a short circuit between the electrode and the workpiece. ANTI STICK allows the welder to remove the electrode more easily.

ARC FORCE stabilizes the arc regardless of its length. Reducing the function values gives a soft arc and a smaller penetration depth, while increasing the function values causes deeper penetration and the possibility of short arc welding. At the highest value for the ARC FORCE function it is possible to "push the electrode into the pool of molten metal and burn the material through. This model has automatic ARC FORCE regulation.