Apple II DVI/HDMI - A2DVI v2.0

A2DVI v2.0 card for Apple II computers tested on a IIe.

Hardware details: https://github.com/rallepalaveev/A2DVI

Firmware details: https://github.com/ThorstenBr/A2DVI-Firmware

The PCB was manufactured and assembled by JLCPCB (excl. Pico) with ENIG coating and 1.2mm PCB and chamfered connector edge for easier slot installation.

Please note that a thin HDMI cable with a compact connector will work best, as the HDMI port faces the rear of the machine where there isn’t much clearance. The card MUST be installed in the correct orientation which is marked on the card and shown in the photos.