Desoldering pump

Top highlights High Quality Desolder. The soldtivelyer sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effec. ompact and Lightweight. Measuring 7.48”X0.79”, the desoldering pump can be used with only one hand, either your right or left hand. Solid Construction. The plunger has plastic backing to ensure stability. Self Cleaning Rugged Teflon Tip Heavy duty plastic and metal body (WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website) Product specifications Manufacturer MIYAKO USACountry of Origin USAItem part number NBW-74MProduct Dimensions 30.48 x 5.08 x 12.7 cm; 226.8 gASIN B01LZPZUED Additional Information Manufacturer: MIYAKO USA Item Weight: 226 g Item Dimensions LxWxH: 30.5 x 5.1 x 12.7 Centimeters Additional details Suck the Solder Away Easily The solder sucker measures 7.48”X0.79”, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively. How to Use the Desoldering Pump Step 1: Press the plunger down until it is been locked and you will hear a click. Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid. Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger. Step 4: Repeat this process if necessary. Specification: Material: aluminum + plastic Size of solder sucker: 7.48" X 0.79” Weight of solder sucker: 32 g Bonus! Have a Desoldering Wick? Here is how to use it! Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick. Step 2: Remove the wick once the solder has been absorbed Step 3: Cut off the used part of the wick Step 4: Repeat this process if needed.