Bildegalleri
(1/4)
Tech 21 SansAmp RPM
Til salgs
3 000 kr
Frakt fra 69 kr + Trygg betaling 189 kr
Trygg handel med Fiks ferdig
Etter levering har du 24 timer til å se over varen. Hvis det er noe galt med varen, får du pengene dine tilbake.
Beskrivelse av varen
Tilstand: Pent brukt - I god stand
Selger min Sansamp grunnet lite bruk og vil investere i nytt utstyr. Veldig pent brukt og låter helt fantastisk!
Ferdig prutet.
Kan sendes på kjøpers ansvar, risiko og kostnad.
Den er godt pakket inn og er klar for trygg frakt.
Har du spørsmål, ikke nøl med å sende en melding :-)
(Flere bilder kommer)
Informasjon om produktet:
The SansAmp RPM is a versatile instrument pre-amp with parametric equalization and SansAmp technology. This single space rackmount model was adapted from our SansAmp Acoustic DI pedal, with the addition of a Drive control, and redesigned as an expanded multi-instrument tool. With a sweepable, semi-parametric EQ and variable gain, the SansAmp RPM is a supercharged tone shaper for any signal source. Partner it with a SansAmp RBI for the ultimate bass pre-amp system, or with a SansAmp PSA for total domination.
FEATURES
• Drive adjusts the overall amount of gain and overdrive.
• Active Bass and Treble controls cut or boost ±12dB
• Mid Shift is a parametric EQ control which allows you to select the center frequency of the Mid control. Its sweep ranges from 170 Hz to 3.0 kHz. This, then, enables you to notch out any specific frequencies that may be causing your instrument to feed back.
• Mid is also an active tone control, cut or boost ±12dB.
• Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry.
• Individual Level control for the XLR out to optimize your amp’s output relative to the P.A. system.
• Effects Loop with Mix 50/50 switch to configure in series or parallel.
• 1/4″ rear input and XLR output with selectable levels.
• Buffered uneffected XLR output to run a dry signal to a separate channel.
• Footswitch input to engage unit. [Utilizes any alternating (on/off) footswitch.]
• Footswitch output to chain and toggle between another SansAmp RPM or SansAmp RBI.
Dimensions: 19″w x 1.5″h x 5.25″d (6.25″d overall) • Weight: 5 lbs.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 6.8.2026 kl. 16:52 ・ FINN-kode: 472215629
