16 sensor moduler til Raspberry Pi / Arduino / Sensor Kit

Pris for alt 290kr

Pakke med 16 sensormoduler for Raspberry Pi (for eksempel 4B / 3B / 3B+ / 3A+/ Zero / 2B / B+ / A+ / B+ / A / B) og Arduino. Består av ulike sensorer for å registrere puls, vibrasjon, lyd, lys, fuktighet, bevegelse, avstand, temperatur, magnetisme m.m.

1. HC-SR04 Ultrasonic Module

The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats do. It offers excellent non-contact range detection with high accuracy and stable readings.

2. IR Infrared Obstacle Avoidance Sensor Module

This module is very easy to use and is often used in robots to detect objects near the sensor. These sensors have a digital output pin that outputs a signal when it detects an object. When the module detects an obstacle, the green indicator light on the board lights up. The module detects the distance 2 ~ 30cm, detection angle 35 °.

3. Microphone Sensor / Sound detector sensor

This sensor is used for sound detection. This module has two outputs: AO (analog output), or DO (digital output). The digital output sends a high signal when the sound the sound intensity reaches a certain threshold. The threshold-sensitivity can be adjusted via potentiometer on the sensor.

4. Photoresistor Sensor Module Light Detection Light

You can use this module for light detection. For example, you can build a Night Security Light project.

5. Soil Hygrometer Detection Module Soil Moisture Sensor. YL-69

This is a simple water sensor that can be used to detect soil moisture. It outputs a high signal when the moisture is above a certain threshold. You can also read an analog signal whose value is proportional to the moisture level. Use this sensor to create an automatic self-watering plant.

6. MQ-2Gas Sensor Module Smoke Methane Butane Detection

This sensor module utilizes an MQ-2 as the sensitive component and has a protection resistor and an adjustable resistor on board. The MQ-2 gas sensor is sensitive to LPG, i-butane, propane, methane, alcohol, Hydrogen and smoke. It could be used in gas leakage detecting equipments in family and industry. The resistance of the sensitive component changes as the concentration of the target gas changes.

7. SW-420 Motion Sensor Module Vibration Switch Alarm

This module can be used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.

8. Humidity and Rain Detection Sensor Module

This is a rain sensor. It’s used for all kinds of weather monitoring.

9. IR Infrared Flame Detection Sensor Module

Flame detection sensor module is sensitive to the flame, but also can detect ordinary light. This is usually used as a flame alarm. Detects a flame or a light source of a wavelength in the range of 760nm to 1100 nm. Detection point of about 60 degrees, particularly sensitive to the flame spectrum.

10. HC-SR501 Pyroelectric Infrared Sensor Module

A PIR sensor is a little module that allows you to detect movement from humans or pets. It’s easy to integrate with your microcontroller.

11. DHT11 Temperature and Humidity Sensor

It’s a great little sensor to measure temperature and humidity in your room or outside. It integrates seamlessly with the Arduino.

12. RF 433MHz Transmitter & Receiver

If you need data sent from one microcontroller to another, the 433MHz link modules are the way to do that (all data is sent via Radio Frequency).

13. Tilt Sensor

The tilt sensor is many times referred to as inclinometer, tilt switch or rolling ball sensor. Using a tilt sensor is a simple way to detect orientation or inclination.

14. KY-008 Laser sensor module

Laser transmitter module, 650 nm (red), gives a small intens beam. Take care of your eyes, do not look direct into the beam. Power consumption: 30 mA at 5 V

16. KY-033 Path Tracking sensor module

The sensor detects if a light reflecting or absorbing area is in front of it. It shows which of the 2 areas it is via digital output. The sensitivity (minimum range) of the sensor can be adjusted by the controller. This behavior can be used to automatically follow a line with a robot.

17. DS1302 Real Time Clock Module

The DS1302 trickle-charge timekeeping chip contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator.

sensor, sensors, modulpakke, modul, moduler, arduino, , raspberry pi, elektronikk, gadget, sett, kit, byggesett, module, lyd, lys, ultralyd, ultrasonic, co2, røyk, røykdetektor, laser, lydsensormodul, temperatur, luft, luftfuktighetsensor, luftfuktighet, luftfuktighet sensor, temperatur, temperatur måler, måler, sensor kit, kit, pakke, infrarød, temperatur, lys, mikrofon, speaker, lyssensor, lys sensor, fotoresistor, resistor, foto resistor, jordfuktmåler, fuktighetsmåler, fuktighet måler, sanntidsklokke, klokke, vannsensor, vann sensor, avstandssensor, avstands sensor, avstandsmåler