Aruba 2530-48G-PoE+ Switch (J9772A)

Selger Aruba 2530-48G-PoE+ Switch (J9772A) *annonsen gjelder kun dette produktet selv om det er flere avbildet!

Link til spesifikasjon for Aruba produktet:

https://support.hpe.com/hpesc/public/docDisplay?docId=c03624915&docLocale=en_US#N12C00

Jeg har også flere Switcher, se mine annonser!

System

Specifications

Description

I/O ports and slots

48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 type 10BASE-T, IEEE 802.3u type 100BASE-TX, IEEE 802.3ab type 1000BASE-T, IEEE 802.3at PoE+)

Media type: Auto-MDIX

Duplex: 10BASE-T/100BASE-TX: Half or full

1000BASE-T: Full only

4 fixed GbE SFP ports

Additional ports and slots

1 Dual-Personality (RJ-45 or USB Micro-B) serial console port

Memory and processor

ARM9E @ 800 MHz, 128MB flash

Packet buffer size: 3MB dynamically allocated, 256MB DDR3 DIMM

Mounting

Mounts in an EIA-Standard 19 in telco rack or equipment cabinet (Rack-Mounting kit available)

Horizontal surface mounting

Wall mounting

Management

IMC

CLI

Web browser

Configuration menu

Out-of-Band management (Serial RS-232C or Micro-USB)

IEEE 802.3 Ethernet MIB

Repeater MIB

Ethernet interface MIB

Performance (IPv6 Ready Certified)

Description

1000Mb latency

< 2.3 µs (LIFO 64-byte packets)

100Mb latency

< 7.4 µs (LIFO 64-byte packets)

Throughput

Up to 77.3 million p/s (64-byte packets)

Switching capacity

104 Gb/s

MAC address table size

16000 entries

Physical Specifications

Description

Dimensions (H x W x D)

4.45 x 44.3 x 32.26 cm (1.75 x 17.44 x 13.00 in)

1U height

Weight

4.72 kg (10.4 lb)

Electrical Specifications

Description

Maximum heat dissipation

236 BTU/hr (248.98 kJ/hr), (Switch only: 236 BTU/hr; combined switch + maximum PoE devices: 1624 BTU/hr)

Voltage

100 - 127 / 200 - 240 V ac

Current

5.8/2.9 A

Idle power1

40.1 W

Maximum power rating2

476 W

PoE power

382 W

Frequency

50/60 Hz

NOTE:

Idle power is the actual power consumption of the device with no ports connected

Maximum power rating and maximum heat dissipation are the Worst-Case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (If equipped), 100% traffic, all ports plugged in, and all modules populated. PoE is the total power budget available to all PoE ports

Environmental Specifications

Description

Operating temperature

0° to 45°C (32° to 113°F)

Operating relative humidity

15% to 95% @ 40°C (104°F), noncondensing

Non-Operating/storage temperature

(-40°) to 70°C ((-40°) to 158°F)

Non-Operating/storage relative humidity

15% to 90% @ 65°C (149°F), noncondensing

Altitude

Up to 3 km (10,000 ft)

Acoustic

Power: 33.6 dB, pressure: 43.9 dB

Safety Certifications

Description

Safety

UL 60950-1

CAN/CSA 22.2 No. 60950-1

EN 60825

IEC 60950-1

EN 60950-1

Emissions

FCC Class A

EN 55022/CISPR-22 Class A

VCCI Class A

Immunity

Generic: EN 55024, CISPR 24

EN: EN 55024, CISPR 24

ESD: IEC 61000-4-2

Radiated: IEC 61000-4-3

EFT/Burst IEC: 61000-4-4

Surge: IEC 61000-4-5

Conducted: IEC 61000-4-6

Power frequency magnetic field: IEC 61000-4-8

Voltage dips and interruptions: IEC 61000-4-11

Harmonics: EN 61000-3-2, IEC 61000-3-2

Flicker: EN 61000-3-3, IEC 61000-3-3

NOTE:

IEEE 802.3az applies to Gb models only

IEEE 802.3at and IEEE 802.3af apply to PoE+ models only

When using SFPs with this product, SFPs with revision B or later (Product number ends with the letter B or later, e.g., J4858B, J4859C) are required